tls pilot Posted May 24, 2023 Report Posted May 24, 2023 Does anyone have a simple way to have the IFD 540 receive input from Stratus 3i for ADSB The new software was loaded setting up the wifi from stratus to the ifd is not understandable to a non computer mind There must be a simple way of doing it? Anyone with the exact steps and formula Please!
N201MKTurbo Posted May 24, 2023 Report Posted May 24, 2023 Put the name of the Stratus in the SSID field Look at the WI-FI connection page on your IPad to get its name.
Tim-37419 Posted May 24, 2023 Report Posted May 24, 2023 5 hours ago, tls pilot said: setting up the wifi from stratus to the ifd is not understandable to a non computer mind connect to the stratus from the ifd
0TreeLemur Posted May 27, 2023 Report Posted May 27, 2023 Coincidentally, I am trying to set this up too. The IFD540 had a PIN set, so I followed the online instructions to override it. Then I changed the SSID in the config tab, page 14/15, tab, accessed through maintenance mode, to match my stratus. But, I did not see how to configure the IFD to show ADS-B traffic? I expected that to be in the map options operating in NAV mode but didn't see it.
Recommended Posts