acdc Posted February 28, 2017 Report Posted February 28, 2017 They look awesome Turtle, they will look great on the yoke. I will PM you my contact info. Great artwork. 1 Quote
TheTurtle Posted March 8, 2017 Author Report Posted March 8, 2017 i finally cut mine out. I sent the rest off to you guys today. Picking up another batch this week for the rest to send out. been busy with not working I did one with a jig saw an 32TPI blade. Leaves a rough edge to be buffed/filed down. Did one with metal shears, kind of curls the emblem some. probably still usable. Before I permanently mount it I think ill wait and see what you guys come up with and then send an extra plate to the guy with best one to cut out for me!! good luck and post your pics! 2 Quote
Yetti Posted March 8, 2017 Report Posted March 8, 2017 If you want to have fun. Make two templates out of Ply wood or pressboard. put the aluminum between the two haves. Then use a router with a laminate flush cut bit to make a precision cut out. you could put several into the "press" and cut them all at once. 3 Quote
Raptor05121 Posted March 13, 2017 Report Posted March 13, 2017 He delivers! Talk about high quality. I'm trying to decide if I want to get my yokes refinished before I mount these bad boys! I think I'll find a CNC shop and see if I can't get these cut out nice. Thanks, turtle!! 1 Quote
acdc Posted March 20, 2017 Report Posted March 20, 2017 Here you go Turtle as promised finished installation and how to cut. 1 Score outline with razor knife. 2 Snap on scored edge and file smooth with jewelers file. 3 Tape logo to any convenient place and pour jewelry casting epoxy sold at Hobby Lobby or similar craft outlet, let set for a couple of days. 4 install on yoke wit clear RTV sealant and gloat... Thanks Turtle great engravings. 3 Quote
TheTurtle Posted March 20, 2017 Author Report Posted March 20, 2017 5 minutes ago, acdc said: Here you go Turtle as promised finished installation and how to cut. 1 Score outline with razor knife. 2 Snap on scored edge and file smooth with jewelers file. 3 Tape logo to any convenient place and pour jewelry casting epoxy sold at Hobby Lobby or similar craft outlet, let set for a couple of days. 4 install on yoke wit clear RTV sealant and gloat... Thanks Turtle great engravings. That looks really good. Scoring!! I messed one up using pencil and then have to rub off the graphite. Epoxy is also a great idea! Glad it worked out Quote
Bob_Belville Posted March 20, 2017 Report Posted March 20, 2017 Good morning Turtle, how's that 2nd batch coming? I want one! Quote
Bob_Belville Posted March 20, 2017 Report Posted March 20, 2017 ACDC - the yoke looks great, did you just prep and paint? Powder coating? Quote
TheTurtle Posted March 20, 2017 Author Report Posted March 20, 2017 6 hours ago, Bob_Belville said: Good morning Turtle, how's that 2nd batch coming? I want one! hopefully have them this week. 1 Quote
acdc Posted March 21, 2017 Report Posted March 21, 2017 (edited) Hello Bob, Yes I had them powder coated after stripping down sand blasted and hand sanded smooth. Reassembled with next size taper pin and reinforced control shaft with internal brass busing epoxied in place and assembled wet. It will take another 49 years or so for the yokes to loosen again. There is a Mooney service bulletin on the subject I just went an extra bit. I signed it off in my maintenance logs I am an A&P, IA, Avionics person. ( Now if I can quit working on the aircraft maybe I can fly more often)... Edited March 21, 2017 by acdc 3 Quote
Bob_Belville Posted April 24, 2017 Report Posted April 24, 2017 I just cut mine out and attached with contact adhesive. Nice improvement. 1 Quote
FBV Posted December 28, 2017 Report Posted December 28, 2017 Anybody have a spare one of these they would sell me? I need one and would prefer not to start from scratch again. If so, please PM me. Sent from my iPhone using Tapatalk Quote
TheTurtle Posted December 28, 2017 Author Report Posted December 28, 2017 17 minutes ago, FBV said: Anybody have a spare one of these they would sell me? I need one and would prefer not to start from scratch again. If so, please PM me. Sent from my iPhone using Tapatalk i still have a few. Send me your address Ill ship you one. Ill charge you for the shipping which for the others was between $5 and $9 depending on if I had to buy a padded envelope at the post office Quote
Mikey Z Posted October 10, 2018 Report Posted October 10, 2018 Turtle, Just bought a ‘66 m20e after 30 years of flying everyone else’s. I would like to get a few of your yoke emblems if I could. I’m doing a full resto and I came across your post. I would really appreciate it! zmikey@hotmail.com Thanks! Quote
TheTurtle Posted October 11, 2018 Author Report Posted October 11, 2018 Im going to try and make a batch of these on friday. They are going to be $20 + shipping now. I got burned by a couple mooneyspace members when all I asked for was shipping. Quote
M20C_AV8R Posted October 11, 2018 Report Posted October 11, 2018 Turtle, I like the one I got from you, appreciate you making these possible to get. I was wondering have you ever considered using the same triangle shape but using the modern logo? Quote
TheTurtle Posted October 11, 2018 Author Report Posted October 11, 2018 15 minutes ago, M20C_AV8R said: Turtle, I like the one I got from you, appreciate you making these possible to get. I was wondering have you ever considered using the same triangle shape but using the modern logo? nope. Old mooney means old logo I can do what ever though. Just need the vector art with a the negative print. edit... I just talked to my guy. His engravers are running full speed right now so he's doing me a big favor and squeezing in a few plates for me so I wont have time until probably after xmas when it slows down for him to work on testing a new style logo. Quote
Mikey Z Posted October 19, 2018 Report Posted October 19, 2018 Hi Turtle, Mikey Z here. Just wondering how the new batch is coming along. Keep me posted please. Thanks again! Quote
TheTurtle Posted October 20, 2018 Author Report Posted October 20, 2018 Hot off the presses. Just picked them up today. Im heading out of town for 2 weeks so anybody that wants one send me a PM with your address. They will be $20 shipped each. Thats per emblem not per plate. You are going to get one of the plates cut in half. The emblem will need to be cut out of that. paypal is solohelp@gmail.com Due to some scumbaggery on mooneyspace they will need to be prepaid. Quote
Mikey Z Posted October 20, 2018 Report Posted October 20, 2018 Hi Turtle, I will take 4 emblems. That is 2 plates. Please email me at zmikey@hotmail.com not sure how to send you a PM from here. Thanks. Quote
carusoam Posted October 20, 2018 Report Posted October 20, 2018 For pm... touch the MSer’s avatar it opens their info including options to send a private message...Best regards, -a- Quote
FastTex Posted January 3, 2019 Report Posted January 3, 2019 On 10/19/2018 at 9:00 PM, TheTurtle said: Hot off the presses. Just picked them up today. Im heading out of town for 2 weeks so anybody that wants one send me a PM with your address. They will be $20 shipped each. Thats per emblem not per plate. You are going to get one of the plates cut in half. The emblem will need to be cut out of that. paypal is solohelp@gmail.com Due to some scumbaggery on mooneyspace they will need to be prepaid. Do you have the other type (kind rectangular) emblem? Does anyone know how to find it? I'm missing one... Quote
TheTurtle Posted January 3, 2019 Author Report Posted January 3, 2019 6 hours ago, FastTex said: Do you have the other type (kind rectangular) emblem? Does anyone know how to find it? I'm missing one... nope, no idea. Quote
AdamJD Posted November 25, 2023 Report Posted November 25, 2023 I missed these by 5 or 6 years!! Bought my F last year and have the sticker on the yoke right now. Need to upgrade that. Anybody have any of these laying around? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.