MooneyPTG Posted September 3, 2016 Report Posted September 3, 2016 Took off this afternoon and saw we did not have 2700 Rpms. More like 2500. Was airborne before I fully comprehended the RPM loss. Climb out slow but steady. Pulled back the prop a bit and pushed it forward and got a blast of full Rpms from the prop. Reduce power setting and the prop control seamed to not go all the way forward. Ran it to maintenance and they are perplexed as to why the prop control is stopping 3/16" from the panel. It is bottoming out on the control that supplies the oil to the prop. Tried to adjust, ran up to 26 and dropped it back to 24. They will look at it on Tues . I am complexed, I thought something got jammed in the linkage that prevented me from going all the way forward with the prop. any ideas on this would be greatly appreciated. We had 30 " MP both times. thanks Kevin Kuehn 920 621 3473
Yetti Posted September 3, 2016 Report Posted September 3, 2016 I vote your cable has slipped, mis adjusted, fixin to break, has broken just hanging on 3
Recommended Posts