helitim Posted March 7, 2015 Report Posted March 7, 2015 A few months ago, I had ordered two of the replacement 3D printed switch covers from Shapeways. The product appeared identical to the original but the fit was just a little bit loose. Day before yesterday I decided to email the product owner listed on the website and inquire if he could make an updated version with a better fit. The reply was a surprising "yes". He has now posted an updated version 0.6 for a slightly tighter fit. I have just ordered two of this version and expect delivery on 3/19. I will post an update as soon as I receive them to let the forum know if the fit is now better. Tim 1 Quote
marky_24 Posted March 7, 2015 Report Posted March 7, 2015 Doh! Just ordered 2 last week, let me know how the new one fit. Quote
Marauder Posted March 7, 2015 Report Posted March 7, 2015 Are these the Klixon or the ETA style covers? Quote
Mooney in Oz Posted March 16, 2015 Report Posted March 16, 2015 Hi there again Tim. Â I have since made inquiries with LASAR and Dugosh. Â I discovered the originals are not available and only the later models are, however the circuit breaker would also have to be purchased, which makes it very expensive. Â This is in reference to an 80 model J. Â Looking very forward to your Pirep. Â Victor Quote
Marauder Posted March 16, 2015 Report Posted March 16, 2015 Hi there again Tim. I have since made inquiries with LASAR and Dugosh. I discovered the originals are not available and only the later models are, however the circuit breaker would also have to be purchased, which makes it very expensive. This is in reference to an 80 model J. Looking very forward to your Pirep. Victor Victor -- are they saying the ETA switches are only available? The older Mooneys have the Klixon style and the ETA was introduced later. They are not interchangeable since the connection to the buss is different. You can still buy the Klixon. Just not the covers separately. Quote
Mooney in Oz Posted March 16, 2015 Report Posted March 16, 2015 G'day there Marauder. Â The covers that helitim is sourcing are Klixon style, but look more like the ETA type from what limited information I know. Â Helitim might be able to elaborate further on this. Â Victor Quote
Marauder Posted March 16, 2015 Report Posted March 16, 2015 G'day there Marauder.  The covers that helitim is sourcing are Klixon style, but look more like the ETA type from what limited information I know.  Helitim might be able to elaborate further on this.  Victor   Good day! We have unfortunately discussed these switches for a bit. You can find details of the differences between the switch types in this thread: http://mooneyspace.com/topic/11420-rocker-switch-cover-replacements-3d-print-your-own/?hl=print  I posted several pictures of the differences between the switches and covers on pages 1 & 2. Quote
Mooney in Oz Posted March 17, 2015 Report Posted March 17, 2015 I should be more diligent with the search function. Â Â Thanks for the link Marauder and particularly your pictures. Â Very helpful. Â Victor 1 Quote
Marauder Posted March 17, 2015 Report Posted March 17, 2015 I should be more diligent with the search function. Thanks for the link Marauder and particularly your pictures. Very helpful. Victor You're welcome. I have been on the quest for these Klixon covers for quite a while. I was hopeful that the 3D printing process would work and I could order up a set to replace my tired ones. Has anyone found a source for the Klixon covers yet? 3D or otherwise? Sent from my iPad using Tapatalk Quote
helitim Posted March 18, 2015 Author Report Posted March 18, 2015 These covers arrived today. They are the Klixon variety. Total cost was $16.99 delivered for two covers. Still have not had a chance to try them on the plane yet so, not exactly sure of the fit. Will let you know. If you need an ETA version, go to the Shapeways website and search ETA and it is available.$4.50 each 3 Quote
Mooney in Oz Posted March 18, 2015 Report Posted March 18, 2015 Hard to tell from the pics Tim, but are these a smooth and brighter white like the later ETA covers or opaque like the original Klixon covers they replace? Quote
Marauder Posted March 18, 2015 Report Posted March 18, 2015 A few months ago, I had ordered two of the replacement 3D printed switch covers from Shapeways. The product appeared identical to the original but the fit was just a little bit loose. Day before yesterday I decided to email the product owner listed on the website and inquire if he could make an updated version with a better fit. The reply was a surprising "yes". He has now posted an updated version 0.6 for a slightly tighter fit. I have just ordered two of this version and expect delivery on 3/19. I will post an update as soon as I receive them to let the forum know if the fit is now better. Tim Never mind. Found it. Let us know how they fit. Quote
PTK Posted March 18, 2015 Report Posted March 18, 2015 These covers arrived today. They are the Klixon variety. Total cost was $16.99 delivered for two covers. Still have not had a chance to try them on the plane yet so, not exactly sure of the fit. Will let you know. If you need an ETA version, go to the Shapeways website and search ETA and it is available.$4.50 each  They look like they have a matte finish. Do they have the glossy ones as the originals?  How about imprinting labels on them? Quote
Marauder Posted March 18, 2015 Report Posted March 18, 2015 They look like they have a matte finish. Do they have the glossy ones as the originals? How about imprinting labels on them? Now you're asking the right questions! At this point, as long as I can get them silk screened somewhere, I'm good! Quote
PTK Posted March 18, 2015 Report Posted March 18, 2015 Here's another right question: Where's my CB certificate and CE credits??????!!!!!!! Quote
marky_24 Posted March 19, 2015 Report Posted March 19, 2015 I was expecting them to be glossy when i received mine, but they are very rough and almost like packing peanuts. So i sanded them with 400 grit and went to the store and got clear labels for my printer and printed the label, then I clear coated the switch, I'm going out to put it on tomorrow. The font was the closest i could find, and its "duru sans" 8 size. I will post more pictures when i get back. I checked them with my digital caliper, and they are with in 100TH" to the original, so i hope they fit. Â 2 Quote
helitim Posted March 19, 2015 Author Report Posted March 19, 2015 As Marky_24 stated, they are a slightly rough finish. Follow his directions for sanding, labeling and clear coating. The new ones do fit a little bit better but, do not have the snug fit of the originals. What I wondered about is if the Klixon switch itself may have just a slight amount of wear that prevents the switch cover from fitting tightly. Next time I am at the airport, I am going to try a new cover on a different switch to test that theory. 1 Quote
Marauder Posted March 19, 2015 Report Posted March 19, 2015 I was expecting them to be glossy when i received mine, but they are very rough and almost like packing peanuts. So i sanded them with 400 grit and went to the store and got clear labels for my printer and printed the label, then I clear coated the switch, I'm going out to put it on tomorrow. The font was the closest i could find, and its "duru sans" 8 size. I will post more pictures when i get back. I checked them with my digital caliper, and they are with in 100TH" to the original, so i hope they fit. As Marky_24 stated, they are a slightly rough finish. Follow his directions for sanding, labeling and clear coating. The new ones do fit a little bit better but, do not have the snug fit of the originals. What I wondered about is if the Klixon switch itself may have just a slight amount of wear that prevents the switch cover from fitting tightly. Next time I am at the airport, I am going to try a new cover on a different switch to test that theory. Thanks for the update and the instructions. I would be interested in what you find out with the fit on other switches. As you know, some of those switches (pitot heat, Nav) should have a lot less activations than others. I suspect there is some wear involved. Quote
marky_24 Posted March 20, 2015 Report Posted March 20, 2015 Switch is installed, but the fit was very loose. I am thinking its more of a material problem, rather than a design. I will interested to hear how helitim's new ones fit. I think they plastic may have to much give in it, but I stuck a little duct tape in all the right places, and boom fits like a glove. Its a bit of work to get it looking good but over all I'M happy for with the results for $6. Quote
Mooney in Oz Posted March 20, 2015 Report Posted March 20, 2015 Thank you both Tim and Marky for your advice and efforts. I will order a bunch of these. $6 with a bit of creativeness vs $220 is an easy decision. Victor Quote
Marauder Posted March 20, 2015 Report Posted March 20, 2015 Switch is installed, but the fit was very loose. I am thinking its more of a material problem, rather than a design. I will interested to hear how helitim's new ones fit. I think they plastic may have to much give in it, but I stuck a little duct tape in all the right places, and boom fits like a glove. Its a bit of work to get it looking good but over all I'M happy for with the results for $6.  Have you gone back to the company who made them and let them know about the loose fit? I wonder if just a little squeaking of the CAD design couldn't just tighten it up a bit. Quote
helitim Posted March 20, 2015 Author Report Posted March 20, 2015 "Have you gone back to the company who made them and let them know about the loose fit? I wonder if just a little squeaking of the CAD design couldn't just tighten it up a bit." Yes, if you view my original post it clarifies this point somewhat. Quote
Marauder Posted March 20, 2015 Report Posted March 20, 2015 "Have you gone back to the company who made them and let them know about the loose fit? I wonder if just a little squeaking of the CAD design couldn't just tighten it up a bit." Yes, if you view my original post it clarifies this point somewhat.  I just re-read the whole thread. Marky has version 1 and you just received version 2. I want to try a set but want to wait until you guys are happy with the fit. Quote
aviatoreb Posted March 21, 2015 Report Posted March 21, 2015 Has anyone tried to fit version 2 yet? Â I got one version 1 --- and it was too loose. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.