Alan Fox

No close to that used , I know someone who has a set if you want me to inquire...

Its done..... Video in a few days..

Getting ready to leave , With saw in hand..... KFME....Stinky Pants is supposed to film the Festivities....

Very much not correct , most planes burn , because on impact , the fuel is dispersed almost perfectly stoichiometric ...Look at that cloud in the video.....Perfect vapor....

If you look at the video , there is a huge cloud of fuel vapor at the moment of impact with the car , It should have ignited , but it didn't , extremely lucky.... as far as the stain , if it was a small spill there would not even be a stain , so my guess , and it is only a guess , is that there was at least 5 gallons or more in that tank...... Also as far as the wing separating , the wing is stressed for load based on lift , not so much drag , that being said , much weaker in the horizontal axis , than the vertical axis...

Sorry Seth , seats are not the good ones.....Better sit down when you find out how much those seats are...

The ki209 is 700 , by glareshield do you mean windshield , or the plastic thing that goes over the panel..

Appreciate the offer , But not willing to split up....

The Cluster gage and the transponder have been sold...

S-tec 40 , AP as removed , when the plane was turned on the ailerons would follow the heading bug , so it works , the Programmer self checked ok also.......SOLD, Call Alan 856 419 5209 .....There is NO PAPERWORK with this item....comes with the servo (not pictured as its still in the wing and will be removed Saturday)......

I am parting out a 65 E model , see pics , Alan 856 419 5209 .... KX155 w/gs 14V -31 760 channel , 2000.00 , KI209 Indicator , 700.00 , Becker 4402-175 transponder 1200.00 , Mooney cluster 200.00 , Vertical compass 125.00 , Narco Escort Navcom 300.00 , S Tec 40 autopilot w servo , brackets harness , DG , 2500.00 .... Call me with your needs , Plane landed in a field and tore the nose gear off , all gear damaged , rt wing and aileron damaged , left elevator damaged , 856 419 5209 ...

I know you can put a 2 blade on a 285 HP beech , but not on a 300 HP , they are the same diameter , so My guess is that the 2 blade cant produce the lift / drag that a 3 blade can , and that it loses too much efficiency when the tips go supersonic...

As far as balancing , you cant balance out the harmonics without a dampener or counterweight , on 4 cylinder LYCs (without counterweights) the harmonic energy is transmitted to the blades , about 3 inches from the tip , it is not uncommon for Lycs to shed prop tips...., If the engine has counterweights it doesn't matter how many blades , the harmonic energy displaces the counterweight and that's that...... I went from a two blade to a three blade in a Beech , 6 cyl Continental counterweighted engine , The difference in Groud roll and climb was SUBSTANTIAL , the difference in top end was negligible....... This is why you see the abundance of three blade upgrades on the 6 cyl Mooneys.... The 3 blade is smoother , but I believe it is because the prop is functioning at a higher frequency than the 2 blade and is more perception than reality , If you switch from a two blade to a three blade , this will take a while to get used to....Also keep this in mind , Most Hartzell props make it to TBO , most MTs do not make it to tbo , where as an aluminum prop takes a ding , and can be filed out , the composites will tend to delaminate and require overhaul... ( you cant file down the L.E. on a composite ) Cody , I know you are a prop guy , so please correct me if I am incorrect....

Both Sold

610242 1 is the part #

Such a sport !!!

Cargo hinge 75.00 , Fuel sender left side 100.00 , exhaust hanger 90.00 Call Alan 856 419 5209 ....

Sold

Sold

No thank you...

GTX 327 Transponder , like new with tray and connectors , Call Alan 856 419 5209....

GTX330 ES transponder , 3000 is in like new condition , with tray and connectors, Call Alan 856 419 5209...

sale pending

Selling pristine GTN650 complete with tray , connectors , config module , and new antenna , first 8900 gets the prize .... Call Alan 856 419 5209 ...