mike_elliott

Met him when he was driving the BRE Datsun 510 for Pete Brock in the transam 2.5 Litre class. He knew that trail braking and setting up for the long straight was how to get it done. His sidekick, John Morton, could make a brick go fast

Personally, I like flying the O's under 12K, you really dont gain much higher up. Here is one burning a paultry 12.6 GPH bustin along at 179-180 TAS I flew from College Park to Fort Lauderdale a while back. Horsepower when flying LOP is determined by FF*13.9 in the higher compression non turbo's acc'd to Mike Busch, so if your a nerd for wanting a percent, you can build a chart. ROP, all bets are off, just fly it 100 ROP from first cyl to peak, and you will keep the aluminum stout for more than a few flights.

It should be I got them from Mooney when I needed to replace one on my F years ago because the hole for the latch pin elongated and would pop open in flight. the 2nd latch held fortunately. Anyway, let me know if you decide you need it, and we can go from there.

Yep, found it

I may have one still I’ll check. I gave most of my aircraft hardware to @junkman when I gave up my hangar, but I’ll look in a bit.

Dear Mooney Enthusiast, We had zero people show up for our last event because it was canceled for Hurricane Milton. Our next event will be this Saturday, November 9 at Williston (X60). As of today on Foreflight their self serv price for 100LL is $4.82. All events start at 11:30. Future events: November 9, Williston, X60 December 14, Fort Pierce, FPR January 11, Winter Haven, GIF. Please let me know by Thursday if you are going to try to come so I can give the restaurant an approximate headcount. If you tell me you are coming, and can’t come do not worry about telling me, just do not come. I do not want anyone flying for any reason if they shouldn’t. Hope to see you soon, Dave and Ruth N46DT 352-408-3343

Lakeland in Nov. Ring up Dave and Ruth Taisch and they will put you on their mail list. My wife and I got out of dodge (tarpon springs, actually) and spent a lovely few days with Acclaim owner Dan Eldridge and his wife Dori. (thanks again for the kindness Dan) Came back to what reminded me of the backroads at St. Lucia.

Sorry to hear that Doug, lots of friends over at the condos at kpie had a bit of trouble with this one. Sasa sell his Bo? Go hang with the Mooney lunch group 2nd sat of Nov. Im sure Someone will hook you up with some mooney speed in altitude.

Florida hangar space has been premium $ for the last 2 decades, and is only getting worse. Inland, you might find a hangar that doesnt have a 3+ year waiting list and is under 899/month, but good luck with finding availablity and affordability in the high demand populated areas. Might I suggest you start contacting all of the private air parks and see if some home owner might lease you his hangar if he isnt using it?

Check out Tesla PowerShare. A 80k cybertruck has the capacity of 10 powerwalls and who says the IRA credit of 30% for home batteries would not count if the battery has wheels? I know, You led Mary, and it matters

Dear Mooney Enthusiast, We had great VFR weather for our last event, lunch at Fort Pierce. Five Mooneys and one Piper brought 11 people, and we all enjoyed visiting and good food. Our next event will be this Saturday, September 14, at the Winter Haven (GIF). All events start at 11:30. Future events: September 14 Winter Haven, (GIF). October 12, Flagler (FIN). November 9, Sebring (SEF). Please let me know by Thursday if you are going to try to come so I can give the restaurant an approximate headcount. If you tell me you are coming, and can’t come do not worry about telling me, just do not come. I do not want anyone flying for any reason if they shouldn’t. This year the Mooney Summit will be on September 27 and 28. If you would like to register go to www.mooneysummit.com Hope to see you soon, Dave and Ruth N46DT

Sansabacap.com

Have your alternator drive coupling tested

Unless something is seriously wrong with the linkage system or with the g1000 computer, I can't see how it would actually "drift" Speed changes and air density changes would affect it, as could the g1000 adhrs measuring. Getting a systems test and calibration check in the g1000 might be the place to start. Something simple like resistance on the module connection rack could be the culprit

Not saying this is the cause here. A lot of premature failures are caused by the tube folding over on itself when installed and being "pinched". Make sure you use a talc and partially inflate the tube when installing in the tire.

A lot of times simply tightening the screws on the inboard sender will fix. The gaskets are like me, old and shrunken. Hopefully it doesn't require Paul Becks fully articulating hands and scrapers. He can supply new gadgets and rubber fuel lines. He is good people

Congrats!

Yup! It now lives in the town with the famous Dixie chicken bar!

Look for one in the silent auction, opening soon! Thanks again Dan for your generosity and support of the Money community

Oh so sorry to hear that Dan. Give Fran and your MIL my best. Just came from KLNS with a new owner in his acclaim to KCLL and thought of you guys. Alex will be posting soon and sending out info to attendees I'm sure. I believe the Marriott properties downtown walking distance to American social where the Sat night banquet will be is where most will be staying, but Alex or Dan can confirm. Let's catch up soon, if I can help let me know

I'll be there and looking forward to meeting you. Thanks for your kind donation to the silent auction. The proceeds will 100% go to helping a downed Mooney pilots family at the time of their greatest need

It's white, I don't know the exact brightness rating however

"All pie is good pie"

Ray, as often as you get a different one, that may be the appropriate response

norm, suggest speaking with @Danb, He is one square shooting CPA that drives a TN close to you