CV1J4. inline filters

[tls pilot]

Realizing many have gone fully ‘electric’ and no longer have a vacuum system,

is this company out of business?  Aerotech Components CV1J4

They were great filters

Any alternate manufactures? 

 

[N201MKTurbo]

https://www.aircraftspruce.com/catalog/inpages/rapco_10-23820.php

https://www.aircraftspruce.com/catalog/inpages/rapco_10-00287.php?clickkey=3946
 

[Mooney-Shiner]

On 10/28/2021 at 3:16 PM, N201MKTurbo said:

https://www.aircraftspruce.com/catalog/inpages/rapco_10-23820.php

https://www.aircraftspruce.com/catalog/inpages/rapco_10-00287.php?clickkey=3946
 

Do I see it correctly? These inline filters are not meant for installation in the F Model? I know the IPC doesn't require any inline filter, but I thought that this would be a good idea to have added protection between pump and DG/AI instruments.  Sorry about highjacking the thread.

[N201MKTurbo]

21 minutes ago, ukrsindicat@yahoo.com said:

Do I see it correctly? These inline filters are not meant for installation in the F Model? I know the IPC doesn't require any inline filter, but I thought that this would be a good idea to have added protection between pump and DG/AI instruments.  Sorry about highjacking the thread.

The RA1J7-1 is the one used in the F.

[Mooney-Shiner]

22 minutes ago, N201MKTurbo said:

The RA1J7-1 is the one used in the F.

Yes, I have this one installed as my main filter in the tail end of the system, but I also was thinking that some here advocated to have an in-line system between the pump and instruments to protect them from carbon. 

[N201MKTurbo]

1 hour ago, ukrsindicat@yahoo.com said:

Yes, I have this one installed as my main filter in the tail end of the system, but I also was thinking that some here advocated to have an in-line system between the pump and instruments to protect them from carbon. 

Seems like overkill.