One man oil change?

[Fly Boomer]

  On 7/22/2022 at 10:10 PM, M20Doc said:

Well, I’d suggest installing it on the Ford it’s meant for.

Expand  

Got the pic off the Internet.  You can find almost anything there!

[Fly Boomer]

  On 7/22/2022 at 10:10 PM, M20Doc said:

Well, I’d suggest installing it on the Ford it’s meant for.

Expand  

Is there somewhere on the TSIO-520-NB (permold) to hook up a pressure pot after the dry filter is installed?

[LANCECASPER]

  On 7/22/2022 at 10:19 PM, Fly Boomer said:

They're all the same, aren't they?

Expand  

Call Continental (or Lycoming) and check with them. Better yet call the FAA.

[Guest]

  On 7/22/2022 at 10:24 PM, Fly Boomer said:

Is there somewhere on the TSIO-520-NB (permold) to hook up a pressure pot after the dry filter is installed?

Expand  

Through any easily accessed oil gallery plug at the front of the engine.

Clarence

[PWL]

By cutting a Phillips X-country oil container across the narrow side, it is possible to make a container that just slips under the oil filter of a j-model that will hold all of the residual oil in the filter.  It is then possible to remove the filter (wear rubber gloves as it gets oily) and then extract the oil container.

After two small oil leaks that developed at the filter seal (didn’t show up immediately after the leak test runup), I bought a Tempest oil filter torque wrench and have not had a problem since.

[PT20J]

  On 7/24/2022 at 4:37 AM, PWL said:

After two small oil leaks that developed at the filter seal (didn’t show up immediately after the leak test runup), I bought a Tempest oil filter torque wrench and have not had a problem since.

Expand  

How were you torqueing it before?

[Marauder]

  On 7/24/2022 at 8:24 PM, PT20J said:

How were you torqueing it before?

Sent from my iPhone using Tapatalk Pro