David_H Posted February 19, 2019 Report Posted February 19, 2019 31 minutes ago, The Avionics Specialists said: Perfect! Maybe I should just take this offer off of the table. Thoughts? You may have read too much into Igor_U's statement. It looked as though as he was trying to be helpful to everyone, just as it appears that you are. 1
Baker Avionics Posted February 19, 2019 Author Report Posted February 19, 2019 1 minute ago, David_H said: You may have read too much into Igor_U's statement. It looked as though as he was trying to be helpful to everyone, just as it appears that you are. You are probably correct and I apologize
KSMooniac Posted February 19, 2019 Report Posted February 19, 2019 The difference you can make is the ability to sell any of their equipment, whereas Spruce cannot. I can get a G5 "over the counter" but not a GFC500. Sent from my LG-US996 using Tapatalk
gacoon Posted February 20, 2019 Report Posted February 20, 2019 Greg is your shop located on the KMFR airport? Where do you perform the work?
Ragsf15e Posted February 25, 2019 Report Posted February 25, 2019 I’m in Spokane... wanna do 2xG5s. Easier here or at your place?
south Posted August 15, 2019 Report Posted August 15, 2019 I wish there was something like this in the Midwest! I am wanting to upgrade my avionics and have the mechanical and "some" electrical background to do it, just need the right supervision to make sure its done right!
Recommended Posts