3914N Posted August 2, 2016 Report Posted August 2, 2016 Recently purchased a M20G and found during the annual that the PC boot in left wing is completely missing. It does explain why I couldn't get the system to work. Would be great if the control linkage was included.
Hank Posted August 2, 2016 Report Posted August 2, 2016 Pull the servo,ship to Brittain Industries in Tulsa. I had a torn boot replaced ~2010/2011 for $135 plus shipping. Removing the servo requires small hands to reach back towards the aileron and remove the single mounting screw from behind . . . The same small hands can also reinstall the servo afterwards.
3914N Posted August 3, 2016 Author Report Posted August 3, 2016 11 minutes ago, Hank said: Pull the servo,ship to Brittain Industries in Tulsa. I had a torn boot replaced ~2010/2011 for $135 plus shipping. Removing the servo requires small hands to reach back towards the aileron and remove the single mounting screw from behind . . . The same small hands can also reinstall the servo afterwards. The problem is that I don't have the servo at all. It must have been removed by a previous owner.
Hank Posted August 3, 2016 Report Posted August 3, 2016 Ah so! You're missing much more than just the boot, which is a rubber sleeve over the back of the servo can. good luck! Check "For Sale" here, and Alan, and call Brittain, too.
1964-M20E Posted August 3, 2016 Report Posted August 3, 2016 I have a couple of servos removed from a 65E if you are interested. Can you get the whole servo form Brittain? How much do they want for that?
TheTurtle Posted October 27, 2016 Report Posted October 27, 2016 On 8/2/2016 at 4:42 PM, Hank said: Pull the servo,ship to Brittain Industries in Tulsa. I had a torn boot replaced ~2010/2011 for $135 plus shipping. Removing the servo requires small hands to reach back towards the aileron and remove the single mounting screw from behind . . . The same small hands can also reinstall the servo afterwards. bonus points if you know the size of the nut back there haha. Is it the same as the one for the rudders? I was just starting to think about how Im going to get back behind there to remove the servo to ship to brittan. Sounds like a complete overhaul of all the servos and the pilot valve and TC gyro is barely more than an AMU.
Browncbr1 Posted October 28, 2016 Report Posted October 28, 2016 I have an extra complete PC system with wing and tail servos, TC, etc. . If need anything, pm me.
AUSSIE Posted December 14, 2017 Report Posted December 14, 2017 Hi , probably a long shot....do you still have the PC system by any chance.... Cheers Tony
Guest Posted December 14, 2017 Report Posted December 14, 2017 9 hours ago, AUSSIE said: Hi , probably a long shot....do you still have the PC system by any chance.... Cheers Tony Tony, What parts do you need? Clarence
AUSSIE Posted December 14, 2017 Report Posted December 14, 2017 Clarence, i am after the 4 servo's for my 1977 ranger......
Browncbr1 Posted December 15, 2017 Report Posted December 15, 2017 Yes, I have the system, complete with all four servos available. Pm me if interested. 13 hours ago, AUSSIE said: Clarence, i am after the 4 servo's for my 1977 ranger......
Recommended Posts