Jim Peace Posted April 15, 2025 Report Posted April 15, 2025 Long story short but after 61 years and an unsupervised mx event my hub cap is gone. The shop said they will make it right but I was just looking up for curiosity. Here is a picture of what it looks like. I have the part numbers but I cannot source the exact one. Ideas on what I am to expect? part number 38520A in my parts manual. Is it needed? I know later models don't even have them. Just the exposed cotter pin.
Fly Boomer Posted April 15, 2025 Report Posted April 15, 2025 44 minutes ago, Jim Peace said: hub cap is gone. Is this it? https://www.ebay.com/itm/405366898469
Jim Peace Posted April 15, 2025 Author Report Posted April 15, 2025 44 minutes ago, Fly Boomer said: Is this it? https://www.ebay.com/itm/405366898469 It looks like it but without direct comparison it’s hard to tell.
1967 427 Posted April 15, 2025 Report Posted April 15, 2025 Actually I think it’s this one https://www.ebay.com/itm/205165708619 most used ones have internal damage from improperly cut cotter pins that cut thru the cap 4
Fly Boomer Posted April 16, 2025 Report Posted April 16, 2025 1 hour ago, 1967 427 said: Actually I think it’s this one https://www.ebay.com/itm/205165708619 most used ones have internal damage from improperly cut cotter pins that cut thru the cap Still not a bad price compared to some that I have seen.
Recommended Posts