Jump to content

Recommended Posts

Posted

Have any of you had a problem finding new rods for the elevators or ailerons? It seems to take weeks to get them from Mooney,; does anyone know of a source that has them in stock?

Thanks,

David

 

Posted

If you are looking at the Rod end like M34-14, it's a Heim (an RBC bearing company) and "standard" part you buy from Spruce. There might be substitute available from Aurora bearings as well. You can remove one from Tube Assembly and replace it with the new on. Tube assy would be a Mooney p/n and available from MS. I went with former, cheaper route. 

Posted

Some of them are welded into the tubes (gear i think?) and they are a little harder to do without involving mooney… we had a thread around here in the last year about that.  The ones that are removable are standard part as suggested above.

Posted

LASAR is always a good possibility.  If they have the part it usually only takes 2-3 days to get it.  I believe when I got a rod end for my rudder last year it came from them and ran about 30 dollars.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.