Need a 6 pack pilot panel

[JoeM]

Anyone have a 6 pack (or 8 pack) pilot panel for sale. I am upgrading the original shotgun panel. 

PM or reply. 

Thanks

[carusoam]

See what @Alan Fox has on the shelf…

Building a new panel is a relatively low cost piece of finished metal…

It is all the R&R effort that gets costly…

also look up Henderson, Hendrickson?… an old MSer with a metal shop that made a few variations for sale…

Best regards,

-a-

[Guest]

4 hours ago, JoeM said:

Anyone have a 6 pack (or 8 pack) pilot panel for sale. I am upgrading the original shotgun panel. 

PM or reply. 

Thanks

I believe that LASAR used to sell a blank.  A few hours work to fabricate one by tracing your old one, then laying out the new holes.  You can also prototype one out of plexiglass first, drawing you layout of instruments to make sure there are no interferences.

[gmonnig]

LASAR did a great job making me a 9hole panel and a copilot side panel. Just got my panel powder coated and turned out great. If you don’t need that many holes in your panel, I think the 8hole setup has a little more spacing. The one I have is very close spacing. I think around $500 total for both? $150 for powder coating. The Gi-275s, AV20S and Garmin USB port are still missing in this picture. 

[carusoam]

Gmon wins the best install of a Sensorcon award today!

That device looks like it belongs there.

Best regards,

-a-

[cliffy]

I just flushed my entire panel for a Dynon HDX in my 64D  I have the panel in the hangar

[carusoam]

Cliffy, let’s let @JoeM know what you have… (this is an invite for Joe to stop by)

Best regards,

-a-

[JoeM]

Thanks Anthony.

Cliffy, PM sent.

[M20F-1968]

On 10/10/2022 at 4:18 PM, JoeM said:

Anyone have a 6 pack (or 8 pack) pilot panel for sale. I am upgrading the original shotgun panel. 

PM or reply. 

Thanks

I have a panel which you could possibly use.  It would need to be cut and altered.  I built it for my plane when I planned to use steam gauges.  The project took so long I ended up with Garmin GTN's.  I'll look for a picture.

John Breda

[MMsuper21]

Just call Hendricks mfg. Very reasonable and awesome.