Mooney Yoke emblem

[Hank]

 

[AdamJD]

Thanks Hank.  I have the '67F which has a different yoke than the '75F.  The 75F has the round emblem.  The 67F has the triangular emblem.  @TheTurtle had printed a bunch of these on metal several years ago.  Does anyone have one of those to spare?

[TheTurtle]

Here is the vector art and a jpg.  Any engraver can make them.  

 

 

mooney vector art

[AdamJD]

2 minutes ago, TheTurtle said:

Here is the vector art and a jpg.  Any engraver can make them.  

 

 

mooney vector art 125.21 kB · 25 downloads

Thank you!

[redcatcher27]

I had this made by Aircraft Engravers. http://engravers.net/ Attached it to the yoke with some RTV. They already had the vector art, but TheTurtle helped to narrow down exactly what I wanted (Thanks TheTurtle!).
The cost, including shipping was $60.75. YOLO!

 

[Echo]

I reached out with an email to Engravers.net. I would like to Install that dark Mooneybird (redcatcher) on my co-pilot yoke. Haven’t heard back yet. I sent them a picture of your bird as installed.

[BillyT0020]

On 7/5/2024 at 10:50 AM, Echo said:

I reached out with an email to Engravers.net. I would like to Install that dark Mooneybird (redcatcher) on my co-pilot yoke. Haven’t heard back yet. I sent them a picture of your bird as installed.

Reach out to Paul at https://www.3dstickandrudder.com

He can make any emblem coated in resin so they won’t fade. I actually just sent him the trim rings from my yokes, he scanned them, 3D printed a better than original design, and had them back to me in a week. Highly recommend. 

[Echo]

On 7/2/2024 at 1:02 AM, redcatcher27 said:

I had this made by Aircraft Engravers. http://engravers.net/ Attached it to the yoke with some RTV. They already had the vector art, but TheTurtle helped to narrow down exactly what I wanted (Thanks TheTurtle!).
The cost, including shipping was $60.75. YOLO!

 

 

Purchased today.  He still had one in stock (probably an extra from your production.  Thanks for heads up.  Same price.

[Echo]

Thanks.