Gary Bymers

I’ve been checking around and these seem to be out of stock, plus I’m using them on my Mooney engine powered Acro Sport II. Lycoming O-360 A1A, so fresh used ones are fine. If anyone has some sitting around, I sure would be greatful! And every time I’ve advertised for anything WTB, I get the scammers, so please save your breath if you are out there waiting. thanks Gary

I will never buy anything without a voice to voice phone call and I did get to talk to this guy . Must have 2 different accounts. One to do the recommendation and the other to do the scam. You must know on this site if you post any “wanted to buy” post this guy will contact you. He has a noticeable Latin American accent and does know some basics about aviation. I was looking to buy a Garmin GNC300. He talked about his avionics upgrade and almost sounded believable BEWARE

I do have 3 or 4. Do you have the model number?

Which part are you asking about? Anything in particular or all the parts for a complete nose gear? Thanks

Anyone have a GNX 300 XL or 250 laying around they would sell? The one in my J died Saturday on the way to buy an M20A! 1600 statute miles in 9 hours of flying. Love Mooneys. Gary ps beware of raymondscott0321 - quite sure he is a scammer

Various wing fairings for sale $50 - $125 depending on which one trailing edge right co-pilot side $125 trailing edge right pilot side $95 most others $50 Message me, I prefer to talk by phone Gary

In my experience this is the most polluted website I encounter. Too bad, because you want to believe it’s just a bunch of Mooney enthusiasts trying to help each other… no such luck

I have a group of mostly early 60s Mooney parts. See the pictures, but not everything is shown. Let me know what you are looking for and I might have it. I don’t have any airworthy flexible intake “boots” or landing gear pucks. The exhaust system came from an airworthy 1962 C model that upgraded to a Powerflow system. $750 for that. The Powerflow look alike was built for my AcroSport II experimental but is too wide. Only for experimental use. $1250. It fits and is shown on a Lycoming O-360 A1A Gary

I’ll take them all. Thanks Gary

Please call me to discuss thanks Gary 608 334 0051

Do you still have these by any chance? Just need the wingtips only. thanks Gary 6083340051

Let me know how to pay

I’ll take the gauges thanks Gary

I’ll take them Gary B

This nose gear truss has no tow bar damage, has been media blasted so the bare metal is visible in the last 2 pictures. I primed this truss so with minor work it would be ready for final cleaning and paint. All hardware and bushings have been removed. It does have grease fittings but it may need new ones. Mooney M20C M20E Nose Gear Truss Media Blasted With Shock Attach Fitting Will fit early Mooneys M20B M20C M20D M20G M20F M20J and probably others. I also have many early Mooney parts so see my other auctions or if you don't see it listed. Call, I may have what you are looking for. I really need to clean out my hangar so am interested in selling not listing for months and months. Thanks Gary Bymers

Correction- Tel 608 334 0051

I’ll take it. Thanks Gary Bymers 608 334 0951

If it’s the original version, I have one Gary 608 334 0051

Thanks, really appreciate the comments and suggestions. Here are a couple of my decorative props. I always wanted a decorative prop similar to the one I flew behind in my 1962 C model for 2500 hours! Lots of memories safely pulling me through mountains in Alaska, islands in the Bahamas, and many family and friend local Midwest adventures!! Gary

Looking for some non airworthy Hartzell blades to make into a wall hanger. I have a hub, but no blades, so either a complete non airworthy prop or just the blades would be appreciated. I also need a Lycoming O-360 A1A carb for use on my experimental Acro Sport II. A core that could be rebuilt or one ready to use would be very useful! I also have many early 60s Mooney parts including 2 exhaust systems - 1 from an M20A for $500 and the other from a 1962 M20C $750 Thanks Gary 6O8 334 zero zero 51

Hello everyone. I am a longtime Mooney owner, having 2500+ hours in M20As, M20Cs, and currently in my M20J. I also have an experimental Acro Sport II that I am upgrading engines from an O-320 to an older Mooney Lycoming O-360 A1A. If anyone has a usable core or better yet airworthy carb that fits an O-360, I need a better one than I currently have. It's an experimental, so I don't necessarily need a yellow tag, just something that can be put together with new gaskets and internal parts and blessed by my A&P IA so that it is safe. I only fly this airplane 25 hours per year maximum, so something that can be made safe for a few hundred hours is fine. Thanks Gary 6O8334OO51

I have many nose gear parts, including the nose gear truss, axle nuts and wheel bearings, and 2 sets of chromoly newly covered front seats. Best to call to discuss nose gear truss - $950 seats - $950 for beige and $1950 for brown other parts please call 6o8 334 oo51 Gary

I have many nose gear parts, including the nose gear truss, axle nuts and wheel bearings, and 2 sets of chromoly newly covered front seats. Best to call to discuss nose gear truss - $950 seats - $950 for beige and $1950 for brown other parts please call 6o8 334 oo51 Gary

I have several nose gear trusses and actuator trusses. $350 - $950 depending on which one is needed. Also a few spinners for Harrell compact hub props and 2 for M20As with the McCauley prop.. or good for experimental aircraft. Always best to call or text me at 6o8 334 oo51 thanks Gary

Hello, sorry, that is one of the parts I really need as well. Thanks for understanding Gary