skytronics harness part help

[eman1200]

ok, in lieu of me overusing the word "thingy" to describe what's going on, here's a nice clean AI description of what I'm looking for:

Skytronics Magneto Harness – General Description & Issue

System Overview (4-piece assembly):

1. Nut – Secures the assembly externally.

2. Collar – Located under the nut, sits atop the blue lead sleeve.

3. Blue Lead Sleeve – Insulating outer cover of the ignition lead.

4. Round Insert (Ferrule/Pin Seat) – Positioned between the center conductor (core) and the blue sleeve; this component compresses (or pinches) the blue sleeve into the collar when the nut is tightened.

Original Design:

• A threaded pin spins into the center conductor (core) of the ignition lead.

• This pin provides a secure electrical connection and mechanical engagement within the magneto harness cap.

Your Current Setup:

• Instead of a threaded pin, your configuration uses a crimped pin.

• The pin is crimped onto the exposed core of the ignition lead (not threaded).

 

The pin is what I'm looking for, part # or where to find would be fantastic.  I checked "thingies-r-us" but since skytronics isn't around anymore, I had no luck    Thank you!