Jump to content

How to pre-wire G430 and wing for dual G5s and magnetometer

JoeM
 Share

Recommended Posts

JoeM Community Regular

JoeM

Posted
Posted

I have my G430 tray out (for another upgrade) and would like to prewire the GPS connectors for dual G5s. I believe the ADI requires two RS232 on pins 56/57. Are there other connections to the 430 for the CAN bus or HSI that I should prewire as well? Also, I am running the wire in the wing for the magnetometer and wondering how many wires I will need?

TIA

Joe

MB65E Grand Master

MB65E

Posted
Posted

Make sure the software version on the 430, matches the drawing you have. 

On the 530 with current software. The lower connector no longer uses pins 60-64. The RS232 needs to go into the upper connector for rs232. The drawing I had said that 60-64 were available for RS232. Wired everything up…. No 232 data!!!

-Matt

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.