Jump to content

Left fuel level threw a Red X today


Recommended Posts

Hi All, 

Descending today on an approach, while running lists, I saw a weird low fuel indication for the L tank on my G1000, then almost right afterward a red "X", which flickered then stayed. I didn't dwell on it since I had independent assessments of volume and I was on a new approach in mid-level IMC and some smoke (wildfires, not my plane). 

On the logs saw it drop to zero, go high, then back to what might be sane (though red X persisted). 
I would imagine it could be anything (sender, wires, connector on the back of the Garmin EIS unit, grounding, etc). Any sense what's likely... what to check first? Or advice on approaching. 

Thankfully, my home-repaired wing capsule gauge is still there. :) That and the compulsive totalizer tracking...

DK

Link to comment
Share on other sites

  • 2 weeks later...
On 8/12/2024 at 8:49 AM, GeeBee said:

If the X disappears after servicing the tank, it is likely the outboard float stuck against the rib when the level gets low. Mine does it sometimes too.

By "servicing", do you mean fueling? The problem did spontaneously go away. Tanks are low again now, without recurrence. I am told that "0" means low resistance, so possibly grounded as well. If I get a chance I will look for worn wires, connectors etc but for now just monitoring. 

Reminds me, I need to build a squawk list...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.