Avidyne IFD 540

[tls pilot]

Does anyone have a simple way to have the IFD 540 receive input from Stratus 3i for ADSB

The new software was loaded

setting up the wifi from stratus to the ifd is not understandable to a non computer mind

 

There must be a simple way of doing it?

Anyone with the exact steps and formula Please!

 

[N201MKTurbo]

Put the name of the Stratus in the SSID field 

Look at the WI-FI connection page on your IPad to get its name.

[Tim-37419]

5 hours ago, tls pilot said:

setting up the wifi from stratus to the ifd is not understandable to a non computer mind

 

 

connect to the stratus from the ifd

[0TreeLemur]

Coincidentally, I am trying to set this up too.  The IFD540 had a PIN set, so I followed the online instructions to override it.  Then  I changed the SSID in the config tab, page 14/15, tab, accessed through maintenance mode, to match my stratus.  But, I did not see how to configure the IFD to show ADS-B traffic?  I expected that to be in the map options operating in NAV mode but didn't see it.