SoundEx Products Insulation

[dsimes]

Has anyone used the sound insulation products wtih cutting templates for their Mooney?  I am considering for my 64E, but I haven't heard anything first hand.  Thanks.   http://soundexproducts.com/ 

[1964-M20E]

I'm considering doing soundproofing in my 64E as well.  I was looking at the black neoprene foam from Aircraft Spruce.  I'm not sure of the cost differential but soundex at least has the template marked on the material.  I was thinking about tackling this during my annual early next year.

[Ron McBride]

I purchased new material fro, Laser when I did my 69F. With the cabin empty, I got a rough measurement and cut large pieces and thenI just sat on the floor and cut the material with sissors and a utility knofe to fine tune them.   there are a lot of small pieces.  I just filled every nook and crany that I could.  I also while I was in there removed any extra wiring, tie wraps etc. the the radio shops had left over the years.

Ron

[flhelo]

I also purchased my soundproofing from Lasar. I bought it off the roll. They can also provide it pre-cut for your model. A little more pricey but it can save you some time with the cutting.