jpjp Posted September 30, 2014 Report Posted September 30, 2014 I am needing to replace a missing O2 Nut and flip style cover on a K Model. Has anyone had any luck locating replacements or any idea where I can find a replacement? Thanks
Houman Posted September 30, 2014 Report Posted September 30, 2014 Is this installed in the plane or portable ?
jpjp Posted September 30, 2014 Author Report Posted September 30, 2014 Installed in the plane on the L/H rear sidewall. There are three outlets on the panel. One of the flip covers is gone.
N201MKTurbo Posted October 1, 2014 Report Posted October 1, 2014 It is part of an AVOX (Scott) Zodiac 23599-22 outlet assembly. I cannot find the cover listed separately anywhere. You might try a junk yard. That part is specified for both Mooney and AeroCommander 112 and 114 It looks like you could just unscrew the cover.
DonMuncy Posted October 1, 2014 Report Posted October 1, 2014 Taking the cover off is easy. The "nut" is built to take a special two prong tool to install and remove, but an awl or other such tool will work. Or if you have a snap ring tool.
N201MKTurbo Posted October 2, 2014 Report Posted October 2, 2014 Try these guys: http://www.o2corporation.com/products_OxygenOutlet.html
Aerodon Posted October 6, 2014 Report Posted October 6, 2014 I have some spare new ones: supercub180@gmail.com.
Recommended Posts