Steve Dawson

These are similar ones I bought and installed to replace the non-working one. I had to cut off and file down the two plastic tags on the side. I haven't had any issues with it in the last 9 months I installed it. I did buy it off of Amazon though.

If you lived closer I would have bought both by now. I sold my sidewinder with my J. They're much better than anything else on the market and are worth ~$2100 new.

Thanks Lance Just checked and it's DOT 3HT and past the 24 years.

Hi Craig, Sorry for the delay, just checked the site now. It's steel and I'll take a look at the manufacturing date to be sure however I believe it's 2007 or 08. I believe that there isn't a time limit on steel cylinders and they have to be hydro tested every 5 years to be legal. The test with certification was done last month. Steve

I have a 77 CF Oxygen tank, recently certified (hydrostatically) available. (pictures available soon) $500.00 US Steve Dawson 519 589 7034 sdawson630@gmail.com

I have Oxygen regulator from a M20K 231 available with the altitude compensator. Good for rebuilding, parts or core value. PN 801896-00 and 801765-00. Asking $500.00 plus shipping. Steve 519 589 7034 sdawsonn630@gmail.com

I'd consider getting your IFR rating first and gather some good experience before taking kids and wife on a long distance trip. Talking from my bad experience, when other people are involved "get-there-itis" can throw out common sense and rationalization.

Just added more details of the actual part number.

Yes if it's not already overhauled

EDIT: for part number details Looking for an oxygen regulator for a Mooney M20K 231. Part number is 801896. In Mooney's parts manual it only refers to the complete tank/regulator and altitude compensator system so just need the regulator with the compensator Must be in good working order. Thanks Steve sdawson630@gmail.com

It sold awhile ago.

How much are you looking to see it for?

I have an UBG 16 also that came with my plane when I bought it. It works OK but is finicky. They are at least 15 years old. If you were thinking of something that fits in the same 2.25" hole, an Insight G2 or G3 will fit and they have significantly more information in that small format. http://www.insightavionics.com/bestg2.htm http://www.insightavionics.com/bestg3.htm I'm replacing mine with something that will enable me to replace all the primary gauges. Possibly a JPI 900, Garmin GI 275 EIS or the EI CGR 30P with possibly their combo CGR30C

Thanks but I was asking where your oil drain line drained into from your separator

From what I understand the RayJay turbo applications came from a diesel Caterpillar engine. They run for hours at reasonably hot temperatures so if an original part number (not Continental or Lycoming number but their source) I think it could be a start for finding a more reasonable priced replacement. That's if it's legal