Skates97 Posted February 14, 2019 Report Posted February 14, 2019 During annual in December we cleaned up a bunch of old wiring behind the panel, apparently over the years when someone had removed or added things they just left old wires back there snipped off... Ever since when I use the PTT on the LH yoke I get feedback (high pitch whine) but only when using my #2 radio (Garmin SL-40). With the #1 radio (Narco Mark 12D) there is no feedback. The PTT on the RH side generates some feedback on the #2 radio, but it is not as loud as when the LH PTT is used. I am assuming it is a ground or wire from the mic jack, maybe a wire that is running next to something it wasn't before we started cleaning things up? With it affecting only the #2 radio I was going to start with tracing either the ground or the wire from the mic jack to that radio (the next time I feel like crawling under the panel). I thought I had read in a post that you could get feedback if the PPT and radio were grounded at the same point, but that is a fuzzy memory at best. Quote
Skates97 Posted February 17, 2019 Author Report Posted February 17, 2019 When something is different, start with what has been changed. Troubleshooting which works in the air, and on the ground. As I said we cleaned up a bunch of old dead end wires behind the panel during annual. We also replaced the old antenna cables with RG-400. Trouble shooting a little more and found that the whine was audible coming from the radio when the PTT was pressed, you didn't have to have a headset on to hear it. This also was occurring without the engine running so it was not coming from the generator or mags. I started with the coax cables, clipped the zip ties holding everything together, separated them, whine is gone. Re-routed the cables and secured them, whine still gone. For whatever reason the way they were run was causing the issue. Glad to go fly without that annoying sound. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.