DonMuncy Posted March 24, 2014 Report Share Posted March 24, 2014 We are all aware that 1/32 inch is the maximum dent allowed for truss damage. Does anybody know where this is documented. Service Bulletin? AD? Quote Link to comment Share on other sites More sharing options...
Seth Posted March 24, 2014 Report Share Posted March 24, 2014 I am aware of the 1/32 rule - not sure where it's stated. remember, a detent, or a paint chip may not be 1/32. Mine has a slight depression, but multiple mechanics have said it's right no the line but not past 1/32. Any more and I need a new truss. -Seth Quote Link to comment Share on other sites More sharing options...
spaz Posted March 25, 2014 Report Share Posted March 25, 2014 It is in the maintenance manual under inspections. Section under landing gear and retraction inspection. There is a note that the max damage due to towing is 1/32 " dent. Mike Sent from my Xoom using Tapatalk Quote Link to comment Share on other sites More sharing options...
DonMuncy Posted March 25, 2014 Author Report Share Posted March 25, 2014 Thanks Mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.