Jump to content

Rustler

Basic Member
  • Posts

    294
  • Joined

  • Last visited

Profile Information

  • Gender
    Not Telling
  • Location
    Taos, NM
  • Reg #
    N414MS
  • Model
    1981 M20K-231

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Rustler's Achievements

Rising Star

Rising Star (9/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

79

Reputation

  1. Never thought I'd say this, but in all fairness to the insurance guys, these rates might be closer to the raw actuarial tables than previous rates were. I wonder if players like the airlines weren't providing a subsidy for our rates in a time when no large payouts were extant for a prolonged period. Then come the 737MAX hits and a reduction in the numbers of companies willing to play in the market, and premiums aligned accordingly. Parker was a great help in suggesting Avemco. They took me on as a first-time insured with them and my association with them has been as cordial as possible. It doesn't do much to remove the bad taste from all this, but it is what it is. My question, I guess, is what happens when I hit 80. A lot of folks get better with age, but that somewhere got lost in the small-print footnotes.
  2. My one-of-a-kind 1981 M20K is now for sale. The sale is being handled by Gafford Aero, San Marcos, TX, and Ken or Michael Medcalf has the information. It can be seen at https://www.controller.com/listing/for-sale/198755197/1981-mooney-m20k-231-piston-single-aircraft The reason I'm selling primarily has to do with the insurance quagmire we find ourselves in. I've been flying since 1957, have never and an accident, incident, or claim. In two years my insurance has gone from $1100 to $2800, with a promise from the only company that would quote that it would increase next year. The virus hasn't helped, either. If you are interested in 414MS, Ken or Michael will give you my number to have any questions answered. Thanks for your interest.
  3. I don't. I merely translated what the OP wrote.
  4. בשוק סמייא צווחין לעווירא סגי נהור ~~ In the land of the blind, the Cyclops is king.
  5. Oh, I don't know. Here's a picture of a JPI 930 installed in a large hole in the panel. I really like it flush mounted.
  6. I have 8, 4 in the rear light fixture and 4 in the front one. While each of the fixtures is capable of operation with the master off, it is usually the front one that is the culprit because of its proximity to the door. I haven't gone to the effort of figuring out how long the battery would last if one were to leave them all on overnight, but I suspect it would be a considerable period. Could you engineer the relay small enough to fit in the fixture itself?
  7. Don-- Why not replace the 1816s with LEDs? The equivalent number is BA9S-WWHP5 at superbrightleds.com. There are 8 of them. You can get the LED in either warm or cook renditions.
  8. I thought you took a Cardinal to Rome.
  9. Hector at Aero Comfort has carpet almost that color. He'll ship you samples.
  10. When I rejuvenated my panel and removed the vacuum system, I installed a PFD1000 Pro and a Sandia Quattro. The units are independent and each has its own backup battery. Works well and there is no clutter.
  11. Don-- I tried Foreflight and didn't particularly like it. I use WingX Pro but recently went all out for FlyQ and find it the best for me. You can use it concurrently (I do with WingX) with any other program you're using without interference. It is intuitive, contains a wealth of features, and the company is sound as far as I can tell. They respond almost immediately to questions you have. I don't think they will offer the lifetime subscription again, but I'm not sure. Their FlyQ Online is pretty nice, too.
  12. Ditto Don's remarks. The weight delta was a big issue to me; that's a lot of weight from which the crankshaft is relieved over an extended period of time. It might be interesting to see if there is a study about the replacement of crank seals with MTs and heaview props. Sam, I responded to your message; if you didn't get it, let me know.
  13. Any Chance you are still running the MT 3-Blade Composite? I am looking to see if anyone can give me some info on how it has been over the long haul!?

    1. Rustler

      Rustler

      Sam--

      I am not, since I no longer own N3832H. She is owned by a fellow named Chase Cormier, 20703 Woodcluster Lane, Houston, TX. I've talked to him several times in San Marcos, and I'm sure he'd be glad to chat with you about it. He's a cop, I think, so you'd probably get the straight stuff.

      Without a doubt, if I ever needed a new prop on my M20K, I'd put an MT on it. I liked the increased acceleration, the smoothness, and the reduced cabin noise level.  I might also add that the delta in weight between the MT and the original prop was in the neighborhood of 8-9 pounds, a significant reduction in the moment on the crankshaft.There have been some problems with the stainless leading-edge strip supposedly causing some sort of delamination, but I never experienced that. 

      I've read some of the snotty remarks about MT in general--Florida office?--but never experienced that. In fact, that office couldn't have been more helpful or knowledgeable. Then again, I usually have absolutely no problem with vendors because I take time to listen to them, not tell them how things are. Amazing how well that works.

      If you have any other wuestions, please don't hesitate to message me.

       

       

         
    2. SAMFOX

      SAMFOX

      Sam,

      Thanks for the note back, it is amazing how far common courtesy will go!!! Hope you are enjoying your K. I have really enjoyed my J...only had it a year but is always fun to fly! 

  14. Over the years, for several airplanes, I have used Aircraft and Marine Assurance, Vancouver, WA, 800.466.4944. They are great folks to work with and are very thorough in their analyses of the policies they recommend. Can't beat 'em.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.