Jump to content

Lois

Basic Member
 View Profile  See their activity

  • Posts

    80

  • Joined

  • Last visited

 Content Type 

Everything posted by Lois

  1. Lois
    If you decide to get them engraved, gun engravers have the tools and techniques to do the work in about 30 minutes. I gave the guy 40 bucks and a case of beer for two TOGA and two Smart Glide.
  2. Lois
    All the switches are made to the same specs so my shop had no problem with them since I already had the rockers set up.
  3. Lois
    Don’t have the number immediately but search Carling Tech AV push button switches. LED backlighting controlled by the duo dim on the same circuit as the other switches.
  4. Lois
    Thanks, the blue is TOGA and red is Smart Glide. I had the titles laser engraved. They are Carling Tech switches. I’ll see if I can still find the part numbers
  5. Lois
    One of the most valuable parts of the supersize printout is being able to chase and read each wire and connectors labels as you deconstruct and modify the system.
  6. Lois
    My logic was I’m spending a huge amount on the panel that has to be completely rewired anyway. 500 for the duodim and switches (parts only) would only disappoint me in the long run. Only gotchas before ya start is where you have room for the circuit breakers you must add and on my plane I needed a diode on the boost pump switch. Lots of repinning old connectors to make it work.
  7. Lois
    I converted to duodim led control at the same time.
  8. Lois
    Well they are almost the same company one is the supplier and one is the retailer. On the locking switch the locking mechanism tacked the place of one of the lights. So the single light highlights the label not the I/O indicator. So I painted the back of the indicator lens. The version I bought are the 12 volt version of the U switch with LED amber back light and green LED indicator with the exception of high boost and prime.
  9. Lois
    Only bleed thru was on the high boost pump switch. A little paint on the back side fixed that. I’m on the road currently but get the numbers for you this weekend Yes I did use them and were super helpful with customer service for the designs on the covers. 12 volt or 24?
  10. Lois
    Working great with no issues! Minor alterations with the new panel entries.
  11. Lois
    I had my exhaust rebuilt about a year ago. Don’t bother trying to call. Just email and they will get back in touch with you.
  12. Lois
    He went under the name ZedAxisLLC.
  13. Lois
  14. Lois
    Check out Etsy. I had a guy in Louisiana custom build a new one from scratch. Unfortunately I don’t have his contact info anymore. I just searched KFC200.
  15. Lois
    I recommend getting the part number from the switch and get that particular diagram from the CT website. It will help understand the circuitry’s design.
  16. Lois
    I would also recommend looking at all the ducts under the dash.
  17. Lois
    Guy made a great set for me and they are outstanding quality. If I did it over again it would make the body’s 1/2 inch thinner and the correct size ends to go over the fittings. Would have made it much easier to install. Ted
  18. Lois
    Yes limited to the original Rocket limits. But it accelerates when the turbo kicks in like a T-38 when the blowers light off. OK almost like it. MT wasn’t inventing anything new to the STC.
  19. Lois
    Thanks it is a labor of love
  20. Lois
    Yes sir composite and weighs about a much as a nickel
  21. Lois
    Thanks KSM. I took all your advice to heart and thank you Rick for you help. Well here she is.
  22. Lois
    Yes. Thank you. The payment was made shortly after I brought up the situation on MS. Merry Christmas
  23. Lois
    Working when removed except radar altimeter is intermittent and the trim switch is intermittent in the nose up movement. $1500 plus shipping.
  24. Lois
    I’ll give 4 more weeks I think that is beyond reproach
  25. Lois
    Nope. I mailed a stamped self-addressed envelope and an invoice.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.