Wanted: 40-24 Cleveland Wheel, also pair of brake discs.

[Steve65E-NC]

     We need a good Cleveland 40-24 wheel assembly (6.00x6 mains) with bearings.  This is the one with screw retained double  seal retainer plates on the outside and a screw retained cap on the inside.  I have new tires on hand .  

     I also plan to replace both brake discs Cleveland 164-9 or 164-109.  So a servicable or new pair of these are also of interest (wear limit is .227inch min.).  

      You can find me on the Members list, and send a private message that I will get by e-mail.  Or, just post here and I will send you a private.  

 

Steve 65E-NC  

[KSMooniac]

Steve, do you know if these are common to the J? I can check later, but if so I might be able to help you out.

Sent from my HTC Rezound using Tapatalk

[Steve65E-NC]

Scott, Probably not.  Aircraft Spruce shows a different wheel for the J.  But, then it shows that exact same one for the C.  Don't know why a C and E would use different wheels.  Maybe some change depending on serial number or year of aircraft. You probably have to look at it to be sure.  I might be able to change over but then I would need two.

Thanks,

Steve

[KSMooniac]

Steve, the manual shows a 40-86 for the J.  I don't know what the difference is.  Sorry I can't help!

[N601RX]

The wheel was changed in 67' The 40-86 was used after that. I think they use different brakes also. If Mooney officially superceeded the pn or issued a service bulletin allowing the change you may be able to use the 40-86.

http://www.parker.com/literature/Aircraft%20Wheel%20&%20Brake%20Division/AWB%20Static%20Files%20for%20Literature/AWBPC0001.pdf

[Mooneymechanic]

I have a new set of stainless discs (taxi time only ) and the wheel you need, drop me a pm with your #