PN for gear warning micro switch

[JimB]

I have a 69 F with the pedestal throttle/prop/mixture controls. Anyone have the PN for the gear warning microswitch in there? It has stopped working. The overhead buzzer is good and I can hear it clicking lightly when I bring back the throttle but no warning. Possible it is wiring but before before I take apart the pedestal, I'd like to have one of these switches in hand. The AMM electrical diagrams show it as 20WM03A but the list in the back doesn't list it unless I am missing something. Thanks

[RobertGary1]

Are you sure it’s contacting? If the friction is loose it will miss the switch. I’d you remove the plastic tops you can remove the cover snd watch it 

Edited June 17, 2021 by RobertGary1

[N201MKTurbo]

.4 -13 1SM1-T .GEAR WARNING SWITCH

https://www.alliedelec.com/product/honeywell/1sm1-t/70120198/

 

[JimB]

10 minutes ago, RobertGary1 said:

Are you sure it’s contacting? If the friction is loose it will miss the switch. I’d you remove the plastic tops you can remove the cover snd watch it 

You may be right but it sounds like it is actuating. Its a little hard to see exactly what it is doing until I take the covers off. 

[carusoam]

If we are discussing the switch that rides on the throttle…

It is easy enough to inspect…. (For young and thin people, it’s under the panel…) 

They sometimes get out of adjustment…

There are pics around here somewhere for adjusting it…

PP thoughts only, not a mechanic…

Best regards,

-a-

[RobertGary1]

47 minutes ago, carusoam said:

If we are discussing the switch that rides on the throttle…

It is easy enough to inspect…. (For young and thin people, it’s under the panel…) 

They sometimes get out of adjustment…

There are pics around here somewhere for adjusting it…

PP thoughts only, not a mechanic…

Best regards,

-a-

This is a different switch and only seen on the quadrant throttle system. Not the push pull style throttle.