N201MKTurbo Posted November 21, 2020 Report Posted November 21, 2020 This is a complete 2 axis autopilot from a Barron. The boots all look good. Not sure what this stuff is worth, but I’ll figure it out.
Mooney-Shiner Posted December 11, 2020 Report Posted December 11, 2020 Do you have any servos that are either marked with part number 20424-0-1 or part number 2983? Mine have boots torn
N201MKTurbo Posted December 11, 2020 Author Report Posted December 11, 2020 29 minutes ago, ukrsindicat@yahoo.com said: Do you have any servos that are either marked with part number 20424-0-1 or part number 2983? Mine have boots torn I'll look next time I'm out there. The small ones look identical to the ones in my old 67 F. 1
outermarker Posted December 12, 2020 Report Posted December 12, 2020 Is there anything left available?
N201MKTurbo Posted December 12, 2020 Author Report Posted December 12, 2020 12 hours ago, outermarker said: Is there anything left available? everything is still available
Igor_U Posted December 23, 2020 Report Posted December 23, 2020 On 12/12/2020 at 6:39 AM, N201MKTurbo said: everything is still available Do you have a Electric solenoid for vacuum system? I don't see it on pictures but it could be in the box...
N201MKTurbo Posted December 23, 2020 Author Report Posted December 23, 2020 1 hour ago, Igor_U said: Do you have a Electric solenoid for vacuum system? I don't see it on pictures but it could be in the box... What you see in the pictures is what I have. It is a bit different than the system used on Mooneys. I think the only things useful are the servos. I already owe them to other guys. I have just been too busy with work, engine and the holidays to deal with it.
Recommended Posts