65C_flier Posted September 27, 2021 Report Share Posted September 27, 2021 On 11/17/2020 at 9:59 AM, larrynimmo said: when I went to remove the grease fitting from the MLG zerk, the pressed in zerk actually pulled out...the bearing base appears to be a brass body, and I was able to tap the zerk back in...it stayed in...from now on I will be using the release lever type of grease fitting when I grease or bust these more delicate zerks My MLG front trunion press-in zerks pull out as well. Has anyone tried oversizing the "drive-in zerk" hole and tapping to a regular 1/4" screw in? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.