Luxuryairtravel Posted October 18, 2020 Report Posted October 18, 2020 My 65 M20E is in annual and I met with the IA to go over the squawk list. 90% of the list is small surface corrosion and some other non airworthiness items. Corrosion on some nuts or push pull rods all surface slight corrosion. I’m not an A&P or IA, but owned 19 aircraft and had my own maintenance shop where these items can be sprayed and or treated not racking 40 hrs of labor! What is the standard prep, cleaning, and treatment? I forget the penetration Or non corrosion spray to apply. I will clean and treat after the annual. Thoughts? Thanks Mooniacs! Quote
MB65E Posted October 18, 2020 Report Posted October 18, 2020 40hrs is standard time when I do an annual inspection. 40hrs of corrosion treatment plus a 40hr annual inspection. Could be pricy. But corrosion will eventually kill all airplanes. I take it seriously. -Matt Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.