jbreda Posted April 15, 2011 Report Posted April 15, 2011 Selling off equipment that I will not be using in my F model rebuild. Please e-mail me at johnabreda@yahoo.com if interested. Garmin 530WAAS and 430WAAS units - 530W had been installed for less than a month, 430W has never been installed, both have been upgraded to WAAS by Garmin - which essentially means it is a new unit since they replace 80% of the electronics, processor and all to do the upgrade. Both have not been installed since the upgrade and have all paperwork, connectors, WAAS antenna - as shipped from Garmin. They are at McKee Avionics who will warranty the units for one year. Garmin 347 audio panel - new as purchased from a Garmin dealer - never installed S-TEC GPSS ST-901 unit - new, never installed Garmin GPS antennas - GA-56 - I have two of these - one new one used Pair of Comant CI-196 antennas - taken off an Ovation with 400 hours - excellent condition Sandia air data computer SAC 7-35 - new in sealed box from Sandia King ADF KR-87 - yellow tagged King ADF KR-87 - repaired, yellow tagged, new display and other parts KI-227 - ADF indicator - this is the -01 version which is slaved Stall warning switches from F model (will fit other vintage Mooneys) Original Mooney headress from 1968 M20F - blue color Hydraulic flap pump - HE625 - rebuilt by LASAR - I have two United Vertical Speed Instrument Ray Jay Turbo Normalizer system for E or F model - completely rebuilt with all STC's, install manuals, drawings and POH letter Extra rebuilt exhaust pipe set for RayJay Turbo Normalizer system (for E or F model) 50 amp Interav alternator along with voltage regulator and overvotlage regulator Fuel shut-off valve from Mooney Ovation Fuel sump from Mooney Ovation Control cables from Mooney Ovation (Prop, throttle and mixture) - vernier type Cowl cheeks (left and right) from vintage Mooney (came off F model) Original F model Top cowling Baggage door from Mooney F model Scott Zodiac 115 ft composite oxygen cylinder Scott Aviation oxygen cylinder brackets for installing the 115 ft Oxygen cylinder John Breda Quote
Geoff Posted April 15, 2011 Report Posted April 15, 2011 John, Is that McKee Avionics in San Marcos, TX? If so I hangar there and have seen the progress on your F model, very impressive. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.