jasong

What should I update? Fortunately both the plane and I made it through the checkride

Looks like this is definitely an alternator or voltage regulator issue. I had my CFI checkride on Wednesday and the ammeter was going nuts most of the time, showing both positive and negative charges (mostly negative), so hopefully we've found the ultimate culprit.

All - seems to get worse with higher RPM and we don't have anything plugged into any of the aux power outlets

Thanks Sherman - I was thinking the same originally, but now that the clock seems normal with the landing light on I wasn't sure if it might still be the culprit

Steven, we had our landing light replaced (with an incandescent one while we wait for our LED to be delivered) last week, but the static existed before that. I'm not sure however if the static disappeared when the old landing light was turned on. Otherwise I don't think the static coincided with any other changes/modifications/installs

So this one has both me and our avionics guy really kind of confused. We've been chasing some radio static that appears to somehow electrical in nature. We assume this because at random intervals along with the static the in-panel clock blinks/flashes/resets (see video below). Although we haven't put a ton of time into chasing down the problem I noticed yesterday that the static (and the clock flashing/resetting/blinking) stops when the landing light is turned ON. Does this make sense to anyone?

All - thank you so much for your input, as always the Mooneyspace folks have exceeded our expectations!

All - wanted to reach out to the collective and see if anyone could help make sure an interior quote we've received is complete in terms of what an "average/typical" (yes, I know those are very subjective terms) interior should include. My partners and I have never been through an interior project and want to be aware of any gottchas or know about items we've missed that should be included. So far the quote contains: -Stripping of existing plastic paint -Covering the plastic with fabric -Covering the glareshield -Reweb seatbelts -Seat upholstery and new headrests -Wall kick panels -Carpet -New door seals -Full soundproofing Thoughts/comments appreciated! Thanks!

Quote: jetdriven If the RPM wanders or hunts, or is sluggish to respond to changes it needs to be looked at. FWIW McCauley C290D governor TBO is recommended at like 6 years. But thats ridiculous. We did ours at ten years only because it had metal contamination. What model is your plane?

Hi all - we recently had a prop shop in Lancaster recommend an overhaul for our prop based on two factors a) a couple of knicks in the prop and the time since last overhaul (about 12 years ago). During a subsequent oil change our normal shop (Airmods), whose opinion I respect tremendously, didn't think the prop condition was even a slight concern and cleaned up the knicks in the prop in about 10 minutes. However, this did get me thinking - what indications might be apparent that the governor is in need of an overhaul? Will there be any conditions/signs/etc that might give it away? Any specific inspection recommendations?

Makes me think about cutting up my certificate and just staying grounded...I really don't want to share the same airspace as this jackass

Quote: N9154V What is the ball doing? At low altitude and high power settings, I have to push left rudder to get straight and level flight. My plane is rigged so that it is completely hands off at altitude. Ron with a 69F

Forgot the pic...

All, See the attached pic, I'd like to get your thoughts. We have an issue and my A&P will take a look at it when he gets back from a trip but wanted to see what the collective thought in the meantime. The picture below shows the plane in straight and level flight. The attitude indicator is level (which is correct) and the DG is not moving. However, the TC would indicate something much different. The effect seems to be more pronounced at higher speeds as a little while after this pic was taken the TC leveled out while I was slowing down and descending for the approach phase of my flight. The plane does in fact roll right if we go hands off but the ball does not move to any significant degree. So is the TC indication demonstrative of the actual roll that is somehow being corrected by yaw (even though the ball doesn't move much) and tied to the rigging? Or is it probably the TC gyros? Jason

Quote: N4352H I have had 4 balances a 1 OH from Sensenich over the years....never an issue. I took the OH back for a 10 minute shimming. This is typical. When I eventually order my Top Prop, I will support this shop. 80 yards next door to Henry Weber, MSC. http://www.sensenichpropellers.com/Main.html?FAQ.html

Anyone overhaul or replace their turn coordinator lately? Looking for thoughts on price and install time.

Quote: GeorgePerry Some great east coast Mooney maintenance shops. I've done business with each of these companies and was extremely pleased with the results. Aerodyne: (Jim and JR) KPGV just west of Norfolk VA http://www.aerodynecorporation.com/contactus.html AirMods and Repair: (Dave) Trenton-Robbinsville Airport (N87) http://www.airmodsandrepair.com/home Chris's Aircraft: (KUUU) Newport RI http://chrisaircraftinc.com/location.html

Quote: jeckford I know..I know...I have read numerous threads and understand the importance of a good prebuy. I have already paid $1000 for a prebuy and passed on the plane due to corrosion issues. My Question is...is it always necessary. My previous pre-buy was with Dugosh and they were kind enough to let me know about a "great" plane that they just annualled and would be for sale. This is a well maintained and well equiped J model that has been annualed and maintaned solely by Dugosh for the last 20 years. Just had an annual by them. Plane has a new engine with great compressions. Would you still get a pre-buy in this instance?

Quote: GeorgePerry http://www.xtranormal.com/watch/7812971/twin-vs-single?page=1 Now I understand!

Quote: jdrake I wanted to alert our group to a service that is geared toward Mooney pilots / owners. Phil Abrams offers Mooney-specific accelerated training. He has flown every 4-seat model and has taught in all manor of aircraft from ultralights, aerobatic, glider to turbine aircraft and has been utilized by MAPA for their Pilot Proficiency Program. Accelerated training is given in the student’s aircraft or Phil’s '84 M20J. His accelerated IFR training is focused on accommodating the students schedule and he strives to make training fun and part of an adventure. He also includes as much "actual" IFR as practical and includes fun locations as part of the cross country experience. He gave me permission to provide his contact info: (609) 613-8983 and philphil_99@yahoo.com and is based both in NJ and AZ so can accommodate you from virtually any location. I’ve flown many times with Phil and he is extremely knowledgeable in both Mooney acft and aeronautics. I have no financial interest in his enterprise and wish you the best in your continuing training mission.

Quote: Cruiser and then the FARs and AIM. Soon we will be paying to see NOTAMs and TFRs as well.

I know charts will no longer be available to the general public, but what about approach plates and AFD entries?

Quote: Piloto I occasionaly fly long distance flights FXE-TJIG (5+ hours) with my family. Beacuse the flight is over water and the Bahamas is impractical to make stop due to Customs hassle. On occasions I get coments like: How much more of this torture Why don't you get a real fast plane with toilet. You told me four hours and is already 4+ hours, lier I can not stand up. You better get me those expensive boots that I want. I don't want to do it in a bag!! Can we stop at McDonalds I already saw the movie do you have other DVDs I am tired of Brazil 66 and the Tijuana Brass CDs. Don't you have other CDs Are we there yet? Before the trip my wife asks me for a new wardrobe just to let me down with a cold flu the day of the trip. But next day she feel remorse and decide to go. Don't get me wrong, my best flights are with my family. Best times are when someone needs to go. I found the back reclining seats to be a big plus. Also flying above FL100 keeps them asleep for a while. Any suggestions or ideas to make long trips more enjoyable José

GM was once a independant company it Died at the hand of UNION selfishness. Now they are Government Motors. A socialist amalgamation of the current administration.

Quote: DaV8or Yeah, you're right. If these low life blue collar guys would just wise up and do 10-12 hour days with no benefits, six days a week for about a $1 an hour, we could compete. Would take care of our immigration problems too. Mexicans would stay at home because they could make more money there. Yep, there are American entitlements to cheap energy, cheap consumer goods, cheap food and cheap resources and we don't care who we have to step on to get it.