Jump to content

7.Mooney.Driver.0

Basic Member
 View Profile  See their activity

  • Posts

    152

  • Joined

  • Last visited

 Content Type 

Everything posted by 7.Mooney.Driver.0

  1. 7.Mooney.Driver.0
    I had a similar issue happen to me and it turn out to be fouled spark plugs on the right side. I tried this and it fixed my problem https://pilotworkshop.com/tips/clearing_fouled_plug/ Good luck friend. Hopefully is just fouled spark plugs. Sent from my iPhone using Tapatalk
  2. 7.Mooney.Driver.0
    is this the elbow you looking for? if not here’s the link for the Ecas parts catalog http://www.jmtech.kr/catalogue/ecas.pdf lots of good stuff in there. here is the cap for the beacon but call and make sure it fits before buying http://www.chiefaircraft.com/aircraft/aircraft-lighting/flashing-beacons.html Hope this helps. Sent from my iPhone using Tapatalk
  3. 7.Mooney.Driver.0
    I replaced mine with those Sent from my iPhone using Tapatalk
  4. 7.Mooney.Driver.0
    Disconnect the probe and check to see if it goes down to zero, check the wiring too. It could be a bad probe or wiring. Worth a shot before buying a new gauge. Sent from my iPhone using Tapatalk
  5. 7.Mooney.Driver.0
    When and where did you experience this issue? I think the navy has been doing some GPS jamming on the eastern side and the Caribbean. Sent from my iPhone using Tapatalk
  6. 7.Mooney.Driver.0
    That would be amazing! Let me know when you have a chance. Thank you very much. Sent from my iPhone using Tapatalk
  7. 7.Mooney.Driver.0
    Hi everyone Does anyone know of a Mooney M20 for rent around Volusia county or Sanford area? I recently purchased a 1970 Mooney M20C that i’m restoring. I have never flown a Mooney before, i’m interested in doing some flying to get check out and be able to fly my Mooney onces im done with it. I currently hold a PPL with instrument rating and i have a high performance endorsement but no complex time. If anyone knows of someone that would be interested in renting their M20 or a place that has one please let me know. Thank you all. Sent from my iPhone using Tapatalk
  8. 7.Mooney.Driver.0
    That sounds like a good idea too! Sent from my iPhone using Tapatalk
  9. 7.Mooney.Driver.0
    Unfortunately no. But i can imagine it being that difficult, i would imagine the hardest part would be getting that center console panel off and not messing up the trim indications. Sent from my iPhone using Tapatalk
  10. 7.Mooney.Driver.0
    https://lasar.com/interior/valve-assy-cabin-air-640208-501 Sent from my iPhone using Tapatalk
  11. 7.Mooney.Driver.0
    https://lasar.com/seals-gaskets/fuel-sender-gasket-replaces-610202-003-462-021 I got mine from Lasar. Sent from my iPhone using Tapatalk
  12. 7.Mooney.Driver.0
    Yes it located inside the cabin, If you have the 201 windshield mod those access panels are removed. Sent from my iPhone using Tapatalk
  13. 7.Mooney.Driver.0
    it installed inside on the upper left hand side of the firewall, you can access it by removing the LH avionics panel. Hope this helps. Sent from my iPhone using Tapatalk
  14. 7.Mooney.Driver.0
    when was last overhaul? Sent from my iPhone using Tapatalk
  15. 7.Mooney.Driver.0
    Hello all Does anyone know the P/N for the positive control electric solenoid dump valve? Thank you all in advance. Sent from my iPhone using Tapatalk
  16. 7.Mooney.Driver.0
    I saw your post a few days ago and today i was browsing Ebay and came cross this. Hopefully this helps. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F142987824726 Sent from my iPhone using Tapatalk
  17. 7.Mooney.Driver.0
    Thank you very much sir. I will post pictures as i go. As of now It needs all the wiring redone in the instrument panel and the right hand fuel tank sealed the previous owner removed all the sealant already so that’s 70% of the work. Im sure you guys will be seen a lot of my post i appreciate all the help and guidance everyone has provided and will proved. Sent from my iPhone using Tapatalk
  18. 7.Mooney.Driver.0
    appreciate the help i’m sure I will be asking many many more questions. Im currently lacking a few parts but they are small parts to the puzzle, i did get the MM & IPC for the aircraft. Sent from my iPhone using Tapatalk
  19. 7.Mooney.Driver.0
    I bought the airplane as a project. One of the previous owner took it all apart and i’m trying to figure out all the wining and where every part goes. i was trying to get all the wining for the landing gear position indicator and warning horn. Here a picture of what the cockpit looks like. Thank you guys for the feedback. Sent from my iPhone using Tapatalk
  20. 7.Mooney.Driver.0
    Hi everyone i have a quick question. Does anyone know what this control box PN: 800275-1 looks like? This is for a 1970 Mooney m20c ranger, this item is under the gear position warning system. Thank you all in advance. Sent from my iPhone using Tapatalk
  21. 7.Mooney.Driver.0
    Hi guys thank you all for the input. After further examination i realized that there where letters stamped on the wires those letter correspond to the letters stamped on the plug. After everything was all set and done i only have two wires i don’t know their location, it looks like they were replaced and no one bother marking them. Sent from my iPhone using Tapatalk
  22. 7.Mooney.Driver.0
    Hi everyone. Im trying to find a pin out for the pane lighting control, previous owner took all the wires out of the connector and didn’t label any of them [emoji25] Thank you all in advance. Sent from my iPhone using Tapatalk
  23. 7.Mooney.Driver.0
    Thank you all for the help i think i’m going to try and make it out of fiberglass i have found the old panel in several pieces. Sent from my iPhone using Tapatalk
  24. 7.Mooney.Driver.0
    This is true im only trying to get the original one to keep the airplane looking factory original. But at the end of the day as long as it functional, safe and reliable i think any substitute will do. Sent from my iPhone using Tapatalk
  25. 7.Mooney.Driver.0
    That a good business idea, i don’t see why it would be a big deal for the fed if you want to go all out you could probably get a burn cert but it would probably get approved under a field approval. I would have to ask my friend about this he works for the FAA. Sent from my iPhone using Tapatalk
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.