Jump to content

Lois

Basic Member
  • Posts

    75
  • Joined

  • Last visited

Profile Information

  • Location
    Garden Ridge, TX
  • Reg #
    N56GD
  • Model
    1980 231 M20K Rocket
  • Base
    KBAZ

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Lois's Achievements

Collaborator

Collaborator (7/14)

  • Conversation Starter
  • Collaborator
  • Dedicated
  • First Post
  • Week One Done

Recent Badges

52

Reputation

  1. My logic was I’m spending a huge amount on the panel that has to be completely rewired anyway. 500 for the duodim and switches (parts only) would only disappoint me in the long run. Only gotchas before ya start is where you have room for the circuit breakers you must add and on my plane I needed a diode on the boost pump switch. Lots of repinning old connectors to make it work.
  2. I converted to duodim led control at the same time.
  3. Well they are almost the same company one is the supplier and one is the retailer. On the locking switch the locking mechanism tacked the place of one of the lights. So the single light highlights the label not the I/O indicator. So I painted the back of the indicator lens. The version I bought are the 12 volt version of the U switch with LED amber back light and green LED indicator with the exception of high boost and prime.
  4. Only bleed thru was on the high boost pump switch. A little paint on the back side fixed that. I’m on the road currently but get the numbers for you this weekend Yes I did use them and were super helpful with customer service for the designs on the covers. 12 volt or 24?
  5. Working great with no issues! Minor alterations with the new panel entries.
  6. I had my exhaust rebuilt about a year ago. Don’t bother trying to call. Just email and they will get back in touch with you.
  7. He went under the name ZedAxisLLC.
  8. Check out Etsy. I had a guy in Louisiana custom build a new one from scratch. Unfortunately I don’t have his contact info anymore. I just searched KFC200.
  9. I recommend getting the part number from the switch and get that particular diagram from the CT website. It will help understand the circuitry’s design.
  10. I would also recommend looking at all the ducts under the dash.
  11. Guy made a great set for me and they are outstanding quality. If I did it over again it would make the body’s 1/2 inch thinner and the correct size ends to go over the fittings. Would have made it much easier to install. Ted
  12. Yes limited to the original Rocket limits. But it accelerates when the turbo kicks in like a T-38 when the blowers light off. OK almost like it. MT wasn’t inventing anything new to the STC.
  13. Thanks it is a labor of love
  14. Yes sir composite and weighs about a much as a nickel
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.