SCAT Duct

[refrivera]

Annual is coming up and I would like to replace the SCAT ducting. Does anyone know the size and length I would need to get?

1962 M20C

TIA!

Edited June 15 by refrivera
Added year/model

[PT20J]

I'd consider ordering SCEET tubing from @Gee Bee Aeroproducts. Guy makes reinforced finished ends and the extra layer of material inside embeds the wire spiral so that it doesn't come loose. You'll most likely never have to replace it again.

[refrivera]

@PT20J - Will they know what size and length I will need?

[PT20J]

14 minutes ago, refrivera said:

@PT20J - Will they know what size and length I will need?

No. I just measured mine. I only know the sizes for a M20J. Check with Guy, but his turnaround used to be really fast. 

You could also check with Frank Crawford at the factory. He might have a manufacturing drawing that has the lengths and diameters. 

[Matthew P]

it varies in length and diameter depending on where it is and what it does..measure it yourself, get extra, DO NOT get the BLACK SCAT

Edited June 17 by Matthew P

[PT20J]

1 hour ago, Matthew P said:

it varies in length and diameter depending on where it is and what it does..measure it yourself, get extra, DO NOT get the BLACK SCAT

By BLACK SCAT I assume you are referring to CAT.  SCAT is silicone and good for high temperatures. CAT is neoprene and usually used for air ducting inside the cabin.

[Matthew P]

8 hours ago, PT20J said:

By BLACK SCAT I assume you are referring to CAT.  SCAT is silicone and good for high temperatures. CAT is neoprene and usually used for air ducting inside the cabin.

That's correct but most  mis-call it scat, DONT buy any black tubing, replace it all with the orange, silicone tubing.

[Gee Bee Aeroproducts]

I have all models in stock

two versions for the J model 

m20c

M20f

Edited June 27 by Gee Bee Aeroproducts