Jump to content

hammdo

Supporter
  • Posts

    2,817
  • Joined

  • Last visited

Everything posted by hammdo

  1. Now, if @Sabremech wants to do a group buy, we can do that next ;o) -Don
  2. Done! We should have $400 now... -Don
  3. I agree with the go fund me. But can do PayPal. I'll be happy to help! -Don
  4. Some days it’s not meant to be. Brian came up yesterday after the weather finally cleared. We tried several times and finally schedules and weather worked out. We did a briefing, pre-flight, and when we were all set - intercom and audio panel quit working. I have a flightcom and a Bendix audio panel but when that happened, we scrubbed it. Was a nice day too — windy but nice. So, I’ll get all the new equipment installed and try again in February. Ugh, really want to fly this baby ;o)... BTW, Brian is awesome. We spent time going over the Mooney, speeds, things to look for, etc. Was a great experience - outside of the avionics... -Don
  5. Yes, absolutely.... Having those would be a big help since they are of a newer design. I’m just checking with my friend on if he can do them... -Don
  6. Got a down block from BDPetersen — will go that angle too while David works his. Will still be looking for an up block but if I don’t get one, may pull mine. Never hurts to try different avenues... @BDPetersen Thanks! I’ll retuned this as soon as possible... -Don
  7. Appreciate the input — I based the material off of an FAA list. For an OPP part, should go with the best available. I’ll look into those you mentioned. -Don
  8. Gotta say, I’m enjoying your posts. I too prefer owner assisted and will be watching this thread with great interest! Keep it up! -Don
  9. Yep, and they had the Cowboys Cafe too — with the 1 lbs lineman sandwich — yum! Boy that was awhile ago... -Don
  10. Yes Addison TX. Forgot to mention that... -Don
  11. Will they also have the up lock block? I have not been able to find that on their site. still want the drawings/other supplier option for owner produced... Glad they’re getting back into that though... -Don
  12. I want to press forward myself. I saw that in the other discussion but what happens if they don’t or loose their CNC again? I’d rather have an out myself. I thought they only had one of the blocks anyway and not both. I’d like to have both... -Don
  13. Well got a surprise today — dead battery cell. Been on the charger too. Luckily , there is a local aviation supply shop in Addison (Falcon Crest Aviation) that had a Concord in stock. I was going to do my Mooney training today but the weather didn’t cooperate— good thing it didn’t. New battery goes in. My plane was moved due to the storms last Friday (shared hanger) so not sure if the power was off on the charger or something else. Gonna seal up the dog house as there are areas air can escape while I’m in there. My 2fers USBs came in — nice to have for each side of the panel... -Don
  14. I think we're at a point to make this happen! ;o) -Don
  15. Yeah, that's not bad at all. I get a lot from them... -Don
  16. Yes, I was going to check with my friend about doing that after I get a new set. I’d rather try and get a 7075 aluminum block machined myself. I think @Sabremech has a good handle on this and since they’d be ‘owner produced’, it could help everyone who may need a set. We could probably setup a prebuy once we have an idea of approximate cost. In fairness to David, he is in business and this has to be profitable for him (having my own business, working for ‘free’ can get costly). I think once the initial prebuy block set is paid, David could get the dimensions out for those to do their own while still having the ability to do more prebuy groups for those who would want to go that route. -Don
  17. David did say he’d consider that. -Don
  18. They have them there! They may be for specific areas like the Caribbean etc. Also, if you are like me and want a VFR wall planning chart, here is the link: http://www.paracay.com/faa-chart-u.s.-vfr-wall-planning-chart-flat/ good from Dec-Dec (a year) and its ~ $10 -Don
  19. I ordered mine from Paracay.com http://paracay.com/FAA-aeronautical-charts/ one of the official FAA printers. Did a great job and very reasonable... I also get the wac chart... -Don
  20. Price it with your shop making them would be a great start. I would assume multiple folks would like to get in on a batch run...
  21. I’d be good with that too. My friend made pulleys for my supercharger and does a lot of CNC work. 7075 is the strongest aluminum, I believe, available and would make a strong set of blocks! -Don
  22. Wanted to see if anyone had one of each (worn out is fine). Want to see if my friend can machine these out of 7075 high grade aviation aluminum. PM me if I can borrow these long enough to have him see if it’s possible... -Don
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.