Rsmithref

Anyone know who does system checks for IFR (Altimeter, vacuum) in Dallas area I hangar at Mesquite, but anywhere works? Any suggestions ‘thanks in advance Randy

Anyone have a recommendation for IFR certification for a M20J in Dallas area? Come to Me or go to them, either works for me. And, what is an expected cost? Just so I won’t get sticker shock. Haha. Thanks in advance, I always appreciate the experience and input given here. N1079P, based KHQZ (Mesquite TX.)

Thanks for y’all’s Input. I will look and try again. First two pictures are what’s on mine now, third is the replacement I got thanks Randy

Where are you Based? I have a 90 J MSE, my Pilot side is burned out. I bought one but I think it’s 12v, I need 24v. Do you have a picture of the back?

I have a 1990 MSE, that I have not been actively trying to sell, but has crossed my mind to get a partner or sell out right here lately. Great plane, my wife just doesn’t enjoy flying as much as I do. It is actually having a GTN 650xi and a GTX 345 installed as we speak, should be ready next week. TT-800 KFC150 etc. etc. ‘message me if you would like to talk about it, really haven’t thought about a price, but would listen to an offer. I’m in Dallas TX.

Well, I’m late to the party. Been looking for one of these also. Just want to say Thanks for helping other Mooney flyers out. Folks on this Forum are the Best

Back from Lubbock, 5 stars for Lubbock Aero. Ramp help and FBO staff was very Friendly and Professional. And No ramp fees. Will definitely park there again and recommend to others.

Ok thanks, I will check all the hoses and fittings again. We have adjusted the regulator twice.the low/high vacuum warning light is sporadic. But always reads low on gauge. It flashes much more than it doesn’t. No bouncing of needle , just steady low thank you

Still trying to figure out my vacuum issue, bout ready to start changing parts to figure it out. I currently have a sigma tek, anyone know if the other brands are interchangeable? Or if I change pump brand, will I need to change other things to be compatible? Any options on quality of pump brands before I go down this road? Thanks so much for your input Randy

Thanks everyone, I’ll give a pirep first of the week.

Thanks to each of you for your comments 1. Yes I pull each breaker that was labeled for any kind of lighting, Nothing 2. Yes the light comes on when I open the baggage door, just like with main cabin door. There is a push switch on both.

I’m having the same problem with interior light draining battery while door is open in the hangar while cleaning or working around the plane. I cannot figure out which breaker would disable temporarily. Any body have any ideas? Thanks for the help

Is the vacuum system still available?

Been awhile since I’ve flown into Lubbock, any suggestions on where to park? Overnight Friday-Saturday

No rotating beacon switch in mine. I really appreciate all of the posts and all of the knowledge I’ve gained on this. I guess I’ll start looking for a GDL 82 or 88. Doesn’t seem to be as quick and easy, but the next best thing.