Htmlkid
-
Posts
137 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Media Demo
Events
Everything posted by Htmlkid
-
I climb at 26/26 and I’ve noticed during the climb my oil temp has been going into the red around 230 degrees. Anyone experience this?
-
What did you use to get such a nice shine?
-
So I just replace my carpet and the problem I have is the Carpet is higher then the gasolatpr pull pin. The picture shown is before replacement, my pull pin is now lower then where the plastic meets the top of the pull loop. My issue is if I reinstall the pull loop it would hold the pull pin slightly open. Has anyone experienced this issue and if so what was your fix. My initial thought is to use a zip tie to make a loop I can pull.
-
I am the owner pilot and I have 15 hours of instruction in this plane. 5 from the previous owner who is a CFI and also 10 hours from a local CFI and neither mentioned doing this ever time I start the plane. It’s also no in any checklist I have. Where is it written this must be done before every flight and why? I do drain fuel from each wing prior to flying to check for water and after each refuel.
-
I’m replacing the carpet on the pilot side and I have two questions. What is the pull pin to the left of the fuel selection gauge and how do I remove it to take off the plastic cover to replace the carpet.
-
Thanks... I likes this package and ordered it last night.
-
I have grey leather seats in my plane that could use a good cleaning. Any suggestions on the best product to use.
-
I just emailed Jaeger Aviation and they sent a great email explaining how 50% of the people who purchase successfully install the interiors themselves and 50% have issues , especially on when having to recondition items themselves. HE was very helpful and stated he's always available to help after purchase. As for Airtex they don't seem to have much listed on their website for M20F's and what they do, picture wise doesn't look that great.
-
I have a 1975 Mooney M20F and I'm considering replacing the interior... are there companies out there that sell kits? Also any ideas or recommendations from others that have done it and the estimated cost?
-
If that was the case wouldn’t other instruments not work also?
-
My narco secondary navcom upon startup today did not display anything. I turned it off and on and nothing...in flight I turned it on again and it worked perfectly. This happened again after shutdown park and restart... any ideas what could be going on?
-
Who did you buy that from and where did you get the wall pieces????
-
Just curious for those that have purchased the precut carpets for an M20F... How easy was the install, any tips and or tricks and did the Velcro provided work well to secure it or did you use something else. Also is it worth purchasing the insulation?????
-
Do you mean let the pump run 6 seconds before I open the throttle or open the throttle for 6 seconds?
-
I recently purchased a 1975 Mooney M20F and Im still struggling with cold starts. My current procedure is turn on master, turn on booster pump, throttle forward, mixture to full rich, pull back throttle to 1/4 and pull mixture all the way back, then if she starts mixture full forward. But she almost never starts the first time... so I randomly do the same thing again... Any thoughts on what is wrong? Warm starts are no issue.
-
Need to do a Prebuy/Annual on a purchase and l looking for recommendations for mechanics in the Atlanta/Agusta area.
-
Im considering purchasing an 1974 M20E and Im curious about the outstanding Ad's on this plane> Many of them are 100 hour Ad's,, and Im curious how much that adds to the cost of the annual along with if any of these Ad's fail, will there be a huge expense in complying afterwards. The specific ad's are: 73-21-01 75-23-04 85-24-03 15-19-07 76-07-12 17-16-01
-
Is anyone familiar or have used First Class Aerospace in Leesburg FL for painting their plane.
-
Yes Im still looking for an instructor and plane. I did email him, thank you, and thank you for your offer on your plane, but Im looking for a newer one with less hours.
-
Yes I am still looking... I texted you but you never responded...
-
Just curious, Im looking at a Mooney M20F who's tanks were resealed in 2011 and now one has developed a very small leak. Im assuming they are going to need to be resealed again????
-
Thanks for the help. Yes they have an M20E and I just reached out to them. BTW of anyone knows of someone selling an M20e,f or J please let them know I'm interested.
-
I currently own a PA28 and looking to purchase an M20C-J and would like to find an instructor who has access to a Mooney for my complex endorsement. Im willing to travel anywhere in Florida to do this.
