Mikhail
-
Posts
43 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Media Demo
Events
Everything posted by Mikhail
-
Koropates, I have to change my pilot inboard track and looking from the bottom it is impossible to get to some location with bucking bar... so I was thinking to use a Cherry Max , but are they approved by Mooney? Thanks!
-
Thanks Oldguy, finally governor installed with bracket, and new cable is connected to the arm....
-
I have to buy a new oil line from AVAIL.. And for fuel pump I’m far to check it the pressure but right now I’m looking how to connect the hose to fuel servo because the output from the pump looking right to the firewall......
-
Thanks Oldguy but the only way how now the small bracket is fit it’s like that (picture). Im confused how I will attached the cable in this case? thanks
-
Guys please advise , we have installed governor and now couldn’t figure out how to install a small bracket that doesn’t feet to the arm.... seems like a governor arm is flip over...? enclising picture here... Any advise? Thanks ! Mikhail
-
Thanks everybody , got it out and fix the problem!
-
Hello guys ! Have anybody drop down a CB panel on M20J? Looks like it is riveted....? Any tips are appriciated ! Thanks
-
When do you switch HSI to GPSS mode? What is the purpose or that? thanks
-
Guys, anybody can advise a good mechanic to help with engine conversion in DFW area? I'm based in Hicks, T67. Thanks a lot
-
Governor is fine but one of the blade I can fathering by hand....So removing the prop tomorrow and bringing to the shop..... I was looking to overhaul the engine+prop in the next 4-6 months, I guess prop will be done first....
-
Find the problem it is prop itself.... removing tomorrow for prop shop... Thank you everybody for suggestions!
-
Yes , checked it with True Tach, tachometer is pretty accurate....
-
-
Fuel flow full throttle 16gph. MP reading 28. Engine off MP reading 29. PA reading 580ft
-
On EGT gage all cylinders showing close temperature. Mags checked at 1700RPM, the drop is as usual...
-
Yes is 27....!
-
Induction is clean, change the old air filter Bracket to new Donaldson then back to new Bracket.... No result
-
English is my 3rd...sorry Prop is cycling with prop control... When shutdown the prop has flat pitch...
-
Yes, blades are feathered....
-
RPM is not getting above 2000, MP is around 2700...
-
Guys, Pleas help with your experience.... Crunked my Mooney after two weeks no flying and I have only 2000RPM at full throttle..... Prior this everything was fine Magneto working pretty good L&R, I have clean spark plugs, change gaskets and O-rings on the intakes, check the fuel flow on the fuel lines with aux fuel pump.... Prop is cycling, idle is smooth.... Tachometr is accurate, check the Prop rpm with Tru Tach.... Any advise what should I check next? Thanks for any tips!
-
Fellow pilots, I'm looking for Flight Instructor with experience on M20J model on the weekend Dec.5th,6th to get proficient on some maneuvers, aircraft based in KGKY. Anybody can recommend someone?
-
Hello Mooney's fellows, I'm looking to work on my Commercial check ride on M20J , can anybody recommend a Flight Instructor in Savanna River Central Area (GA,SC)? Home airport is KAIK. Many thanks.
-
Anybody has a picture hot AirWolf separator fit in M20J compartment ? Thanks
