7" g3x or TXI on the right side of a J

[bmcconnaha]

has anyone installed a portrait mounted 7" screen on the right side of a J model mooney?  thanks in advance.

Thanks,

Bryan 

[thomas1142]

23 hours ago, bmcconnaha said:

has anyone installed a portrait mounted 7" screen on the right side of a J model mooney?  thanks in advance.

Thanks,

Bryan 

Yup, and love it. Pic is old now, center stack has GTN 750 and GNC 255. 

[mcheavens]

I am in the process of two 12" displays with a G5 on the left and the center stack with a gtn750, gfc500, and a 331. Here is the panel mockup. Note that the order of the center stack had to change. It now has the autopilot on top with the 750 aligned with the bottom of the G3's.

Wiring has been completed, 750 is on backorder (ordered in August for November delivery).

All going in a '79 K model.

[Steve Dawson]

11 hours ago, mcheavens said:

I am in the process of two 12" displays with a G5 on the left and the center stack with a gtn750, gfc500, and a 331. Here is the panel mockup. Note that the order of the center stack had to change. It now has the autopilot on top with the 750 aligned with the bottom of the G3's.

Wiring has been completed, 750 is on backorder (ordered in August for November delivery).

All going in a '79 K model.

Have you gotten any word from your Garmin dealer about further delays? 

[mcheavens]

My delivery (Ordered in August '21) was scheduled for November '21 for the GTN-750. Garmin's email to all its dealers said "No further orders will be accepted" and that November and December deliveries are still in the system, but likely won't happen until the first quarter of '22.

- They did not give any more info. Good thing my plane is also having an engine overhaul so the delay does not bother me.

When the panel is installed I will update the real photos. It was in earlier this week, but is off having more silk screening done.

Mark