aerobat95 Posted August 16, 2011 Report Posted August 16, 2011 Hey guys, quick question for you. What are ya'lls thoughts on the tail mods from Lasar? The Dorsal fin vertical seal and the tail root horizontal fairings are the ones I was looking at. Worth while or save my money? Thanks Ray Quote
AlexR Posted August 16, 2011 Report Posted August 16, 2011 I would be interested in a reply also. I did the rudder and elevator hinge covers and am happy with those. Don't know what they go on there own, speedwise, but I got about 4 knots at 4500ft and 25 square combined with the alieron and flap gap seals. Quote
aerobat95 Posted August 16, 2011 Author Report Posted August 16, 2011 I need to get the rudder and elevator hinge covers as well.....I have the pretty much all the other mods either installed or in the process of being installed. Should be pretty nice once I am done. Quote
testwest Posted August 26, 2011 Report Posted August 26, 2011 Where are you getting the work done? And +1 for the tail group...check over at Lone Star Aero for the parts too, at San Antonio Int; Airport. Dennis Bernhard is the man there. Quote
aerobat95 Posted August 27, 2011 Author Report Posted August 27, 2011 I am having Ron Fisher do the mods. He did a 201 windshield mod for one of the other guys on here and it came out really nice. He is also putting in the oil cooler relocation, flap gap seals, and the wheel well liner. I had him also replace the fairing where the exhaust exits the cowling as it was cracked. I will probably do the tail mod in conjunction with my annual in November. Any other mods that you recommend? I was wanting the SWTA cowl mod but they no longer produce it.....its unfortunate because it was really nice. I did however look at the ARI cowl but just cant find enough info on it so I have pretty much ruled that out. If I were to see one in person and it looked good then maybe. Quote
Comatose Posted August 28, 2011 Report Posted August 28, 2011 I have the ARI closure, and can take some pictures for you when i get home in a couple days if you'd like. I think it is vastly better than the LASAR flat plate. Can't speak for performance, because it and a lot of other mods were there when I bought the plane. I think the big J spinner looks significanty better too. My spinner and cowl don't meet up exactly, which could have just been sloppiness on the part of the cowl installer, or could have happened when the engine was overhauled (15 years or so after the cowl went on.) I am the only one that ever notices that, though. The cowl closuere has been on since 1986. There is some minor stopped drilled cracking in two of the inlet corners, but otherwise it looks pretty good. On a good day I can get 150-152 knots true at 25 squared in my C, but how much of that is the closure, I can't say. Quote
aerobat95 Posted August 28, 2011 Author Report Posted August 28, 2011 If you could take a few shots of your ARI closure that would be awesome.....thanks. Quote
aerobat95 Posted August 28, 2011 Author Report Posted August 28, 2011 Jim, Overall do you like the cowl mods from ARI? What were you overall impressions? I see you have the tail mods as well....what do you think of those? Ray Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.