Search the Community
Showing results for tags 'edm'.
Found 4 results
-
Hello everyone, I recently scored a used JPI EDM 830 (huge upgrade from my EI UBG-16) for a killer price. I wanted to flush mount the unit in my panel, which would require me to redesign my existing panel. I saw JPI has a flush mount for around $80, but I didn't want to purchase it if I really didn't need to. Since I was already redesigning my right side panel in CAD, I also decided to design a flush mount for the EDM as well.. I have attached a few images of the 2nd iteration of my design which will use locknuts press fit and epoxied in place. Is it okay to install something like this in my plane? Is it imperative that the mount need to be metal? The part will be constructed out of ABS, so temperature resistance and rigidity/strength are not an issue. Thanks!
-
For my M20J - 201: I bought a JPI EDM700 to replace a faulty JPI EI from Willmar but unfortunately they(he) went out of business and have been unable to track down the instrument. Also had an annual and new prop that I don't have paperwork for yet...Anyone aware of a loose 700/730? Or perhaps have one to sell? Or how to reach Brian? ;-/ I also have a GNS 430 with a sticky button - would like to buy a WAAS 430 or 530 to replace. Thanks to any responses! See you @ SNF. 605 389-4225 mei.cfii@gmail.com
-
For Sale: RPM Pickup for JPI Engine Monitors. I had this installed in my M20J until 2015, when I replaced my engine from the IO360-A3B6D (i.e. Bendix Dual Mag) to the IO360-A3B6 (i.e. conventional Slick mags). I posted about the experience in this thread: http://mooneyspace.com/topic/15898-m20j-io-360-a3b6-conversion-experience/#comment-221002 The sensor worked with both my EDM-730 and EDM-830 engine monitors.The attached photos show both the unit itself and a picture of it installed on my plane. It's just a loop of metal with wires on it--hardly makes a difference whether it is "new" or "used." But of course I will honor returns if for some reason it doesn't work for you (you pick up return shipping cost). The attached graphic shows a screen-grab from the JPI website, and an excerpt from the installation manual. You can see that the new unit goes for $395. (!!!) I am selling this unit for $200 + UPS ground shipping. If interested, please email directly at dhc@jpl.nasa.gov Dan
-
Any PIREPs on the JPI 930? I'm considering it, I really like all the features it would add but still a bit hesitant about going digital primary. Has anyone installed this unit? Is it worth going primary over just the advisory nature of the 830?
