Jump to content

Chris newton

Basic Member
 View Profile  See their activity

  • Posts

    30

  • Joined

  • Last visited

Everything posted by Chris newton

  1. Chris newton
    Sending the cylinders out to have them overhauled thought it would be a good idea to have the prop checked as well. It’s been on the airplane for 14 years, not having any issues with it but while the plane is down . I’m in the Indianapolis Indiana area. Is there a good place in the Midwest to send it to? it is a Macauley 2 blade.
  2. Chris newton
    ETA
  3. Chris newton
    The red plastic cover on my master switch broke. Where is the best place to find a replacement?
  4. Chris newton
    Fuel flow is reading 0. Display is fine
  5. Chris newton
    I have a FT 101 fuel totalizer in an 89J. The flow meter quit working today. Where can I send this for repair or get another one?
  6. Chris newton
    I know continental makes cylinders for the io360 any pros or cons to using them?
  7. Chris newton
    Trying to figure out what the Cylinder part number is for and IO- 360A3B6D. I need to replace one.
  8. Chris newton
    I have a 1989J with brakes on both sides. Can’t seem to get the left side bled properly. Right side is fine. Any tricks that anybody has come across to bleed the brakes?
  9. Chris newton
    The plastic indicator piece is in good shape .so I just need the cable. Thanks for the replies
  10. Chris newton
    I need to replace the cowl flap indicator cable on a 1989 M20J . Where might I find one ?
  11. Chris newton
    Darrel If you still have these I will buy them
  12. Chris newton
    It’s the bolt for the nose gear.Laser has had them on order since July and still waiting. So I am looking for another source.
  13. Chris newton
    I am looking for a NAS6607-72D bolt. This is hard to find. Anybody have a good source for NAS bolts?
  14. Chris newton
    I countersunk the top of the rams so they fit perfectly into the cone style jack mounts. The collars are a good safety idea and won’t scar the shaft. When fully retracted they only have to be raised about 1 inch to come into contact with the jack points. Then another 1.5 for the gear retract test
  15. Chris newton
    They are 3 ton 24” jacks from Harbor Freight. I paid $50 each for them
  16. Chris newton
    I couldn’t see paying big$ so fabricated these up since the annual is due soon. Fairly inexpensive to do and long over do.
  17. Chris newton
    Perfect thank you
  18. Chris newton
    The needle broke on the guage where can I find a replacement
  19. Chris newton
    Mc Farlane made one for me . Great to deal with
  20. Chris newton
    If you want to sell it let me know
  21. Chris newton
    Yes that’s it
  22. Chris newton
    The pic of the 2 pin is correct. I like that LED upgrade thanks thanks for all the info
  23. Chris newton
    Unfortunately that’s not it. It requires a 2 pin bulb
  24. Chris newton
    I have a 1989 M20j. Looking for the wing trailing edge light bulb part # and lens replacement. 28 volt system
  25. Chris newton
    I have a spinner but not the backing plate if that helps any
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.