N400YS

Yup, that is the place where I thought that the screw should be :-) but I am obviously wrong! Don't worry, I just check the problem in order my mechanic solves it. thanks for your advises.

I agree with a loose bushing on the steering horn!!! Happen to me....don't wait before it get worst!!!! It was scary for me! I replaced mine by a lasar retrofitted one! problem immediately solved

Hi Here is the end of the story: The Hi Vac alarm was ON because the adjustement screw is missing....... I fixed the problem by lowering the vacuum waiting for replacing the screw or the whole vacuum switch! By the way, were can I find this part? Could someone give an idea of the cost of this part? Thanks

You're definetely right!I will adjust the regulator at 4 inch....That will solve the problem and save my gyro's ;-) Thank you very much!

Hi Folks! I encounter some worry with my hi/lo vacuum alarm on a 1995 M20J MSE. Since the vacuum pump has been replaced, the alarm is showing on! The analogic indicator indicated 4 inch of Hg before replacement of the pump but now the vacuum is 4.5 inch. When the engine is iddled, vacuum is 4 on the alarm is gone off. Do you think there is a way to adjust the hi/lo vac alarm or I am condamned to adjust the vacuum regulator in order to stay at 4 inch??? (normally the vacuum range is with 5) Thank you for your advises! Olivier

Hi Guys Did you hear about this SB.... http://www.lycoming.com/Portals/0/techpublications/servicebulletins/SB621%20Fuel%20Pumps.pdf Time to check your fuel pump! Olivier France

Thank you Robert! Actually, it is my second Mooney :-) I had a share in a 20E and left it for more confortable and to fly IFR with an autopilot! I will follow your advices! If the web links stay broken, I will contact Mooney directly! Thank you all!

Hi I just bought a M20j ans i'm looking for downloading all the SB and SL on the Mooney Support ....and it seems to be impossible? Could you be kind to tell me where can I download them? Thanks Olivier FRANCE

Hi Guys Could you tell me how much it cost to you to modify your panel like you did it? I have a M20E with a full original stock panel, and I would like to begin an IFR....so, I'm interested by your wunderfull modification! Thanks Olivier

Hi All I'm a new Mooney 1966 M20E owner. Very glad to enter in the community even if the plane I bought needs an extensive restauration.... My plane have all the mooney problems due to poor maintenance except corrosion and a good engine...not so bad . I'm fixing the soggy tanks, Pannel and avionics have been checked, brakes are checked and so on. I noticed a very bad play on the steering that give a very bad feeling at the landing (8 seconds ride...what a prank ) So I will replace the steering horn with a LASar REBUILT one. Does someone who already made it, give me some advises to proceed ? What is the easiest way to replace that part? Gear up? Gear down? Thanks Olivier France