JetSet1967

What is the name of the Eldarado Product?

I had to overhaul my Carb air box. I had to remove the lower cowling, so I decided that I had all this removed and it was crazy not to do the Generator/Alt conversion. I also opted to replace the starter with the lightweight high torque starter as well. The hardest part of the whole install was trimming the baffling so the Alternator would fit. If you are good with your hands it is very easy.

What Interior Parts do you have?

Can someone point me in the right direction. I would like to purchase a CNC router/engraver to make new instrument panels for my M20C mooney.

How much?

Can someone give me your photos and or ideas for mounting the Garmin 796 in the M20C-F

How much for the complete interior including all the plastic panels and side walls?

Did u install it? How do u like it vs the JPI?

I am in need of a replacement Glareshield for my M20C. Can someone point me in the right direction?

Just wondering if anyone has installed one of these. I installed a FP-5 and a UBG-16 in my M20C. I would like to install something more user friendly. I have seen discussion of the JPI 930, but nothing on the EI brand.

I would like to install a external antenna just to clean up the cockpit.

Does garmin make a antenna that you can mount on the exterior of the aircraft that will run both the gps and the xm weather?

so just for clarification....the old field wire can be removed? And if i follow the wiring diagram the amp meter will still work?

Im installing a plane power alternator on my M20C. Replacing my generator. My question is on the voltage regulator there is a field wire, gen wire and a bat wire. Behind the voltage regulator in the Avionics bay is a shunt with the with two large wires and two small wires (the small wires have fuse links. On the generator there were two wires one large and the field wire. The large wire went to the voltage regulator and the field wire went from the gen back to the fire wall (not sure where it went from there. I have run all new wires to the alternator and the voltage regulator that was supplied with the plane power kit and installed it per the install instructions. I would like to use my amp meter in the cluster gauge what do i have to do for that to happen.

Looking for a good avionics shop in East Tx. I am going to install the EDM 930, Aspen or Garmin PFD/MFD and a total redo on my M20C panel.

Have you sold this aircraft..I need to try and buy something by year end. Can u send me photos and a complete spec sheet. Also what is your asking price?

Good news...Called Hartzell and talked to Erin..she sent me a warranty claim form..Filled it out...got new composite spinner next day air NO CHARGE. Only downfall is its is white. But overall very satisfied with Hartzell Customer service...

Happened in flight...The good news is, it was uneventful, all I noticed was a little vibration. Thought that the prop may need to be balanced. The prop was installed 2 years ago. It has just shy of 40 hours on the prop and spinner.

I have a Top Prop from Hartzell on my M20C. It has less than 40 hours on it and look what happened. I hope that Hartzell will warranty this..Anyone else had this happen?

Do you still have the glare shield...If so I would like to purchase it..Cell 6624164367

Does anyone know if there is a direct replacement for the glass bulb on the gasolator for the C model.. My glass is chipped at the edge and will not seal off...