PLANEGUY

If it has mod one marked on the mod tag you are good. if not you should let your avionics guy ( or me if you are near Tyler) mark it for you. It will be a no charge item.

I assume it is a 750 is it grey or black?

I stand corrected This is the S# list of units and what has to be done TABLE 1 – Return to Garmin Model Garmin P/N Serial Numbers Warranty Status / hourly allowance GTN 650 (Black) 011-02256-00 1Z8001498 through 1Z8001801 Warranty Reimbursable / (1.5 hours) GTN 750 (Black) 011-02282-00 1ZA001270 through 1ZA001876, 1ZA000644, 1ZA000709, and 1ZA001230 Warranty Reimbursable / (1.5 hours) GTN 750 (Gray) 011-02282-50 1ZA200303 through 1ZA200319 Warranty Reimbursable / (1.5 hours) GTN 650 (Gray) 011-02256-50 None NA If the serial number is listed in Table 2 and has NOT been previously marked as Mod 1 – proceed to the “Mod Level Marking” Section of this bulletin for further instructions. If the serial number is listed in Table 2 below and IS marked as Mod 1, proceed to Step 3 of the “Mod Level Marking” Section of this bulletin for further instructions TABLE 2 – Mark Mod 1 Model Garmin P/N Serial Numbers Warranty Status / hourly allowance GTN 650 (Black) 011-02256-00 1Z8000300 through 1Z8001497 Warranty Reimbursable / (0.5 hours) GTN 750 (Black) 011-02282-00 1ZA000300 through 1ZA001269, except for 1ZA000644, 1ZA000709, and 1ZA001230 Warranty Reimbursable / (0.5 hours) GTN 750 (Gray) 011-02282-50 1ZA200300 through 1ZA200302 Warranty Reimbursable / (0.5 hours) GTN 650 (Gray) 011-02256-50 None NA

Quote: PLANEGUY As far as I know there is no recall on the GTN 750. there is field loadable software updates. Lot of you guys use Maxwell over at longview?

As far as I know there is no recall on the GTN 750. there is field loadable software updates. Lot of you guys use Maxwell over at longview?

Quote: N601RX The 106 indicator is not always needed.

Quote: flyboy0681

Quote: jetdriven

Just to anwser all the people that ask a GTN 750 installed not counting tax will run you between 17k and 18k depending on the panel work not counting any trade in values on your old equipment.