Jweiner03
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Media Demo
Events
Store
Everything posted by Jweiner03
-
Jack, Thanks for the info, the plane has the 503 regulators that have not been changed. We have replaced and repaired( new coupler) the alternators, could we have miswired them? Jay
-
Yes, I do have a service manual. My issue is the "hi volt " light never goes off even when the alt. field switches are off. The light should be blinking to indicate a low volt condition. Jay
-
I finally got both alternators working on the plane, but still have a " hi/low volt" light on the annunciator panel. I have 29.2 volts on theJPI gauge. Any help tracking down this issue would be helpful. Btw the plane in question is a 1987 252. Jay 252VV
-
Thanks for the info, when I emailed the factory the said the VR515 was the regulator i needed. Mooney wants over $1800.00 for the OEM replacement, that's crazy. I will check with Don Maxwell to see if he is refurbishing the original Jay
-
Satelmaszek, I would like to purchase your spare regulator. You can PM me with a price at jweiner03@earthlink.net The pinouts would also be helpful. Regards Jay
-
The factory told me the PMA voltage regulator for the 252 is a VR515, I purchased one and the connectors are different, does anyone know how the 515 color coded wires match up to the Mooney connector pin numbers? Thanks Jay