Officer25
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Store
Everything posted by Officer25
-
Awesome, thanks a ton.
-
Hello, My Garwin 6-pack integrated/combined gauge set went a little haywire. I’d like to troubleshoot it to determine what needs repair, does anyone have the pinout for the cannon connector in the back? Specifically the pins for oil temp are what I’m chasing.
-
Looking at the IPC again, I may have been wrong. It doesn’t accurately reflect the elbows/unions that exist. The change to a Weldon pump likely necessitated a change in hardware (using an elbow at each port) that isn’t reflected. Thanks for pointing that out
-
If anyone comes upon this issue in the future, I called LASAR and they let me know that leather back-up ring is now MS28777-6 RING The parts catalog calls for the ring only to be installed on the outflow port of the electric boost pump. I’m now having some leakage on the inflow port, so I’m going to slap a backup ring on there to see if it solves the issue.
-
Thanks for the replies everyone. I took off the muffler and pressure tested it. All checks out good there, no leaks at all when I inspected it. Going to reassemble and lube up the ball joints with C5A, and with new exhaust gaskets for the exhaust risers. Appreciate the help.
-
Had a CO alarm go off in flight and de-cowled to check what’s going on. I see nearly every ball joint and exhaust probe leaking a decent amount. Any recommendations on how to go about repairing? I know how to deal with the exhaust flanges and replace the gaskets there l, but I’m not familiar with how to seal up ball joints or probes.
-
Fuel tank leak with odd stain
Officer25 replied to Officer25's topic in Vintage Mooneys (pre-J models)
Thanks everyone. Does anyone know why it’s this odd circular shape? Is there some sort of circular device in the wing that the fuel is flowing around? I’ll be opening the access panels and taking a look and updating later. -
Fuel tank leak with odd stain
Officer25 replied to Officer25's topic in Vintage Mooneys (pre-J models)
Thanks everyone for the replies. It leaks there no matter the fuel level. Last tank reseal was many years ago. Does opening the access panel nearest to it require draining the tank? -
Hey everyone, I’ve discovered a leak on my left wing that has this oddly circular shape. It’s near a hole that I can’t determine the purpose of. I’m not aware of where the fuel tank actually ends in relation to the outside of the plane, if anyone can provide some insight as to what this could be it would be great!
