Endre Holen
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Store
Everything posted by Endre Holen
-
Hi there. Installing a GFC500 AP in a M20F. Need to remove the roll servo in the right wing. I can not get to the nut on the backside to remove it. What is the trick??
-
Thank you all. I ripped out all of the vacuum hoses and servos. There is a lot of stuff there.. Ordered the electric step!
-
I am installing a Garmin autopilot and solid state HSI and DG so the vacuum system and servos are going out. I am trying to find if the vacuum for the step is on the same vacuum system or different?
-
HI there. We have a M20F with a 300hr since overhaul engine. We have adjusted the oil pressure nut all the way out but still are up against the top end of the range.. Right around 100PSI. I wonder if I should pursue finding a low pressure spring. Or perhaps someone installed a high pressure spring without knowing? Any tips for how to proceed?
-
Yeah I think they are a little worn. Where can I order the rod ends. New to the plane so trying to figure out who has parts
-
First time doing the annual on a M20F. The gear doors have some play in the down position. Looks like it is coming from the bearing in the rod ends holding the doors. Is there anything to do with that or normal?
-
Hi there. We are doing an avionics upgrade. Does anyone have the outline of the left and right panel in a CAD file? If not we will trace it and input it but would help with a starter file.
